A sweeping car chef recently told me that the sweeper was only used for almost a year. When the vehicle was recently used, it suddenly returned to the teacher's oil situation. The sweeper also shivered when the speed was low. The situation, but also the cold start is more difficult. The battery of the vehicle is also changed. Is it because of the problem that the sweeper is in the factory? After inquiring about the maintenance expert of the sweeper , it was only possible to know that the engine carbon deposition was serious. There may be a part of the driver is not clear about the concept of car carbon deposition, although carbon deposition seems to be a relatively good thing, but it really has to come up with problems, but also a threatening ability.
If we use the relevant components of the sweeper's engine and other intake valves as the heart of the vehicle, carbon deposition is a blood clot that can threaten the normal working of the heart. Carbon deposits can also be classified into two types: combustion chambers, valve deposits, and carbon deposits in the intake pipe. The reason for burning carbon in the combustion chamber and valve is that the engine cylinder of the sweeping vehicle will be fueled and then ignited each time it is working. The ignition is cut off at the instant when the sweeper’s engine is extinguished. Gasoline that is spewed out will not burn, and it will only remain in the combustion chamber and intake valve. Although gasoline will volatilize very quickly, some of the petrol in the gasoline will be preserved. This accumulation will eventually increase the thickness and eventually form a carbon deposit. If it is the use of poor gasoline, then the speed of carbon deposition will be faster and faster.
The carbon accumulation in the intake pipe means that when the engine of the sweeper is turned off, some intake valves of the cylinder cannot be fully closed, and the fuel that has not been completely burned evaporates and will produce some black in the intake pipe. Carbon deposition. The increase in carbon deposition creates blockages that directly affect the vital capacity of the sweeper's engine and the respiratory system.
The engine carbon deposit is a very serious matter. Then how should the carbon deposits of vehicles be checked? In fact, the method for checking the carbon deposit in the intake pipe is relatively simple. It is only necessary to disassemble the throttle valve to be able to clearly see how the carbon deposition situation is. However, the combustion chamber and valve carbon deposits need to be checked by professional service workshops, such as the use of an endoscope for observation of valve deposits, the removal of spark plugs and injectors, or the use of diagnostic computers. The change of the feedback voltage of the oxygen sensor and the like are performed. (Text / Sun Ni)
Connecting rods are a key component of Nissan's engine. It connects the piston to the crankshaft and helps to convert the reciprocating motion of the piston into the rotational motion of the crankshaft.
Connecting rods are usually made of high-strength steel or aluminum alloys to withstand the high forces and temperatures generated in the engine. It is designed to be lightweight and durable to keep the engine running efficiently.
Nissan uses advanced manufacturing techniques and materials to ensure the quality and performance of the connecting rods. They go through rigorous testing and quality control measures to ensure they meet the highest standards.
Nissan Connecting Rod,Venolia Connecting Rod,Tuscan Connecting Rods,Adept Connecting Rod
Wuhu Hangtian Automobile Connecting Rod Co., Ltd , https://www.htconrod.com