At present, the large and small parking lots that we can see everywhere are full of cars. The owners of the vehicles can not find parking spaces when they drive around for a few laps. In the end, they will drive out of the parking lot again. It brought inconvenience to the owners, but also wasted a lot of time. Daoer Controlled to this issue, combined with domestic and foreign technology independent R & D and production of parking spaces to guide the intelligent parking system, the system has been widely used in major car parks.
The parking guidance intelligent parking system installs parking sensors, parking space controllers, data processing devices and corresponding data transmission networks above each parking space. The parking guidance controller and a number of parking guidance screens and parking guidance screens are located in the parking lot. Each parking space indicator box is connected to each parking space, and each parking space detector can detect whether the corresponding parking space has a vehicle, and this information is transmitted to the parking space controller through the parking space controller. The total controller passes the obtained signal. The parking space display is displayed and flashes through the light box at the corresponding parking space.
Compared with other car park systems, the parking guidance intelligent parking system not only has all the advantages of other parking systems, but also gives car owners a clear indication of the location of the remaining parking spaces and parking spaces. Due to these characteristics of the parking lot guiding intelligent parking system, it will certainly be favored by people in the parking lot.
1. Using advanced technology, the appearance is beautiful and elegant.
2. High structural rigidity, smooth operation and low noise.
3. Equipped with advanced concentration pretreatment equipment (good for sludge flocculation) and low operating cost.
4. The gravity dewatering area is equipped with advanced distributors to distribute materials evenly and extend the life of the filter belt.
5. It has an extra-long gravity dewatering zone and a wedge-shaped dewatering zone, which fully dehydrates the material and ensures that the material will not overflow in the pressing zone.
6. The roller system is arranged scientifically and orderly. Gravity dehydration, wedge dehydration and press dehydration are discharged separately without interfering with each other. The diameter ratio of the press dehydration roller is large and the dehydration effect is good. Therefore, it has large production capacity, energy saving and high efficiency.
7. The continuous operation from feeding to mud cake discharge has a high degree of automation. A PLC interface can be set up as needed to facilitate centralized microcomputer control.
8. The power transmission mechanism adopts mechanical or variable frequency stepless speed regulation, with a large speed regulation range and wide adaptability.
9. The filter belt is equipped with a reliable backwash device to ensure the dehydration effect of the filter belt.
10. Use pneumatic tensioning and pneumatic automatic deviation correction devices to ensure the safe and normal operation of the filter belt.
11. The operation is safe and reliable, using infrared safety protection and a full range of emergency safety parking devices.
12. Filter belts with different structures can be configured according to different materials to achieve high filtration accuracy.
Filter Press,Pp Plate Filter Press,Syrup Filter Press,Belt Filter Press
Changzhou Senjie Environmental Protection Equipment Co., Ltd. , https://www.jssenjie.com