Semi-Automatic Plastic Water Coffee Milk Cups Food Container Bowl Thermoforming Machine for PP PS Pet Material

LX3122HF-IM-B High Quality Uninversal thermoformer for any use

BRIEF

*Video link:   https://www.youtube.com/embed/YbFpssK2NMw
 
HF-IM thermoformer is a trim-in-place type thermoforming machine which takes advantage of mould with rules steel knife for performing forming and cutting in the same station. and the second and the third cut-station are available for performing fuction of post-trim and hole-punch.
it is perfect for making part of PP PET PS etc and completely automatically produces disposable rectangular or square or round shaped roll-edged containers and trays with forming, trimming, and stacking conveying on one operation cycle.  

Design Feature

Use Steel-Rule-knife for performing forming and cutting in the same station
Trim-in-place for processing PP PET PS PVC BOPS material etc. specially perfect for PP .
Second cut-press and Third cut-press are available for hole punching and post-trim
Automatic stacking ,counting unit and conveying system
Trim-in-place for parts with rolled edge (turn-down lip)
Technology of trim-in-place brings a neat and identical trimming(cutting)  
Plug assistant for deep forming of draw
Floating knife and free knife are available for post-trimming film with high shrinkage rate.
Extra Contact Heat plate for Minimizing power consumption is available.   
 









FAQ
1.What can IM Model do?
It produces clamshell,container,lid, tray and dish with rolled-lip
2.What material IM mdoel can process?
It can mainly process PP PET BOPS PS PVC sheet
3.What is MAX. speed of praticl production?
 As far as we tested, it is 33cycles/min for 0.2mm PET . for higher speed , we still need  more testing
4.What is Trim-in-place and what is post-trim?
Trim-in-place means forming and cutting inside the same mould .
Post-trim means cutting after forming.
5.what is different among IM 2in1 ,IM 3in1 and IM 4in1?
 *IM-2in1 does  forming and cutting in the same station with steel-rule-knife.
 It can makes any packaging  if there is no requirement of making holes on it.
 *IM-3in1=IM-2in1+ second cut-press   , it can do trim-in-place process and post-trim process . it means it can do cutting after forming station  and  in forming station.
 *IM-4in1=IM-2in1 +second cut-press +thrid cut-press, it can do trim-in-place and post-trim process and also do hole-punching  .
6. what is the advantage of trim-in-place ?
* bring indentical trimming for parts made in film with high shrinkage rate like pure PP .
* no wasting time on adjustting accuracy of trimming
*no wasting money to make an independent cutting tool

Technical support 
Upon receiving the deposit, we will offer the following technical services: 
1. Make drawings of your project for your approval after receiving your samples
2. Provide mould drawings  .
3. Provide electric diagram .
4.provide drawings of sensor layout, pneumatic layout, sensor layout and motor layout
5.provide picture of labeling of all electric parts and pneumatic parts.
6. Free technical suggestions on adjusting of equipment layout and application. 
5. Equipment upgrading (customers need to pay the cost); 

Quality assurance 
1. Strictly conforming to ISO9001-2000 quality management system an and Security  conforming to CE ;  
2. Strict control from purchasing inspection, process inspection to final proofing; 
3. Established several QC departments to execute quality control regulations; 
4. Detailed quality control examples: 
  (1) Complete files for quality control and quality feedback; 
  (2) Strict inspection for the components  to assure products free of damage and avoid rust-eaten and paint peeling off later on. 
  (3) Only qualified components will be assembled and total equipment must be inspected completely before sale.
 
After sale service 
1. we can offer a full training in our factory on operation and maintain
2. Installation and commissioning in buyer's factory is available with all cost caused by visit on buyer's account. 
3. The warranty is one year.  And after one year of warranty, service is still available with cost on buyer's account if it
 involves parts changing.

LX3122HF-IM-B High Quality Uninversal thermoformer for any use

BRIEF

*Video link:   https://www.youtube.com/embed/YbFpssK2NMw
 
HF-IM thermoformer is a trim-in-place type thermoforming machine which takes advantage of mould with rules steel knife for performing forming and cutting in the same station. and the second and the third cut-station are available for performing fuction of post-trim and hole-punch.
it is perfect for making part of PP PET PS etc and completely automatically produces disposable rectangular or square or round shaped roll-edged containers and trays with forming, trimming, and stacking conveying on one operation cycle.  

Design Feature

Use Steel-Rule-knife for performing forming and cutting in the same station
Trim-in-place for processing PP PET PS PVC BOPS material etc. specially perfect for PP .
Second cut-press and Third cut-press are available for hole punching and post-trim
Automatic stacking ,counting unit and conveying system
Trim-in-place for parts with rolled edge (turn-down lip)
Technology of trim-in-place brings a neat and identical trimming(cutting)  
Plug assistant for deep forming of draw
Floating knife and free knife are available for post-trimming film with high shrinkage rate.
Extra Contact Heat plate for Minimizing power consumption is available.   
 









FAQ
1.What can IM Model do?
It produces clamshell,container,lid, tray and dish with rolled-lip
2.What material IM mdoel can process?
It can mainly process PP PET BOPS PS PVC sheet
3.What is MAX. speed of praticl production?
 As far as we tested, it is 33cycles/min for 0.2mm PET . for higher speed , we still need  more testing
4.What is Trim-in-place and what is post-trim?
Trim-in-place means forming and cutting inside the same mould .
Post-trim means cutting after forming.
5.what is different among IM 2in1 ,IM 3in1 and IM 4in1?
 *IM-2in1 does  forming and cutting in the same station with steel-rule-knife.
 It can makes any packaging  if there is no requirement of making holes on it.
 *IM-3in1=IM-2in1+ second cut-press   , it can do trim-in-place process and post-trim process . it means it can do cutting after forming station  and  in forming station.
 *IM-4in1=IM-2in1 +second cut-press +thrid cut-press, it can do trim-in-place and post-trim process and also do hole-punching  .
6. what is the advantage of trim-in-place ?
* bring indentical trimming for parts made in film with high shrinkage rate like pure PP .
* no wasting time on adjustting accuracy of trimming
*no wasting money to make an independent cutting tool

Technical support 
Upon receiving the deposit, we will offer the following technical services: 
1. Make drawings of your project for your approval after receiving your samples
2. Provide mould drawings  .
3. Provide electric diagram .
4.provide drawings of sensor layout, pneumatic layout, sensor layout and motor layout
5.provide picture of labeling of all electric parts and pneumatic parts.
6. Free technical suggestions on adjusting of equipment layout and application. 
5. Equipment upgrading (customers need to pay the cost); 

Quality assurance 
1. Strictly conforming to ISO9001-2000 quality management system an and Security  conforming to CE ;  
2. Strict control from purchasing inspection, process inspection to final proofing; 
3. Established several QC departments to execute quality control regulations; 
4. Detailed quality control examples: 
  (1) Complete files for quality control and quality feedback; 
  (2) Strict inspection for the components  to assure products free of damage and avoid rust-eaten and paint peeling off later on. 
  (3) Only qualified components will be assembled and total equipment must be inspected completely before sale.
 
After sale service 
1. we can offer a full training in our factory on operation and maintain
2. Installation and commissioning in buyer's factory is available with all cost caused by visit on buyer's account. 
3. The warranty is one year.  And after one year of warranty, service is still available with cost on buyer's account if it
 involves parts changing.

Hot strip and plate mill rolls

Hot strip and plate mill rolls are the rolling rolls used for hot strip mill, hot plate mill, large size and heavy plate mill, continuous casting and rolling mill.

Available models: Vertical Rolls, Roughing Rolls , Finishing Rolls, Back-Up Rolls , Temper Rolls , work rolls.

Barrel diameter: 1500mm maximum

Unit weight: 25mt/pc

Material: Alloy cast iron, adamite, high chromium steel, high chromium iron, high speed steel, indefinite chilled cast iron, High Nickel Chromium, duplex cast steel, chromium 3% - 5%, alloy cast steel etc.

If you have any questions, please contact us directly. All the Rolling Mill Rolls can be produced as per the customer`s drawing. Welcome to visit our Factory. For any inquiry, Please send mail directly to us.

Hot Strip And Plate Mill Rolls

Hot Strip And Plate Mill Rolls,Hot Mill Working Rolls,Hot Mill Back-Up Rolls,Hot Continuous Rolling Rolls

Shijiazhuang BKDR Metallurgical Science & Technology Co.,Ltd , http://www.bkdrtech.com