1) with powerful Chinese XINCHAI 490/ original JAPAN ISUZU C240/MITSUBISHI S4S engine;Â
2) with auto electric hydraulic transmission by finger with TCM technology;Â
3) Duplex/triplex mast 3000-7000mm;
4) with copper radiator, Wide back mirroe/Led light/Warning lights/Luxury waist support seat/Cooper tank/ Lamp shade protection frame /Ramjet overhead guard/ /Tilt cylinder dust shield;
5) with a tool box and free spare parts;
6) with CE certificates, quality is guaranteed.
| Specifications | Unit | FD25 | |||
| 1 | Characteristics | Power | Â | diesel | |
| 2 | Rated Capacity | kg | 2500 | ||
| 3 | Center of load | mm | 500 | ||
| 4 | Lifting height | mm | 3000 | ||
| 5 | Free lifting height | mm | 135 | ||
| 6 | Forks L×W×H | mm | 1070x122x40 | ||
| 7 | Tilt Forward/Backward | . | 6/12 | ||
| 8 | Min.turning radius | mm | 2240 | ||
| 9 | Min.ground clearance(Mast) | mm | 110 | ||
| 10 | Overhead guard height | mm | 2120 | ||
| 11 | Height from seat to overhead guard | mm | 943 | ||
| 12 | Front overhang | mm | 473 | ||
| 13 | Perf | Max.traveling speed(loaded) | km/h | 19 | |
| 14 | Max.lifting speed(loaded/empty) | mm/s | 470/510 | ||
| 15 | Drawbar pull/Gradeability | kN/% | 17/20 | ||
| 16 | Dimensions | Overall length (without fork) | mm | 2570 | |
| 17 | Overall width | mm | 1175 | ||
| 18 | Mast lowered height | mm | 1990 | ||
| 19 | Mast extended height | mm | 4000 | ||
| 20 | Chassis | Tire | Front | Â | 7.00-12-12PR |
| 21 | Rear | Â | 6.00-9-10PR | ||
| 22 | Wheelbase | mm | 1600 | ||
| 23 | Tread width | Front/Rear | mm | 970/970 | |
| 24 | Curb weight | None-load | kg | 3750 | |
| 25 | Powertrain | Battery | Voltage/Capacity | V/Ah | 12/90 |
| 26 | Engine | Model | Â | XC490BPG | |
| 27 | Rated power | kw/r.p.m | 37/2650 | ||
| 28 | Rated torque | Nm/r.p.m | 148/2000 | ||
| 29 | Cylinder amount | Â | 4 | ||
| 30 | Bore×Stroke | mm | 90x100 | ||
| 31 | Displacement | Â | 2.54 | ||
| 32 | Fuel tank | L | 60 | ||
| 33 | Transmission | Â | 1/1 automatic transmission | ||
| 34 | Working pressure | MPa | 17.5 | ||
Quality Control
We use advanced equipments, eg: welding robot and others to realize over 95% automatic production line.Every
forklift part is produced by ourselves, our products are all well-designed and strictly tested, We traite  every process from  prepare materials- structure-painting-assambly to delivery to make customer's satisfaction.
VIP Solution
SNSC forklift can install different attachments to help your work, like paper roll clamp, side shifter, full free container mast, bale clamp, drum clamp, block clamp, fork positioner, tyre clamp, rotators, carton clamp, cabin, etc.
Our services
WARRANTY TIME:
The warranty period for forklift is 15 months or 2500 working hours begins from the forklift arrival date of oversea port, depends on which come first.
SPARE PARTS SERVICE:
We have free wearing parts to present you with the forklift.
Warranty period of Spare parts is 6Â months, begins from 30 days after shipment.
MAINTENANCE SERVICE
Our products are all well-designed and strictly tested. If any maintenance problem you can not handle, we can also offer training and maintenance services in our factory field or at your site.Your requirements will be handled promptly and appropriately.
OEM SERVICE
With the authorization of the brand, we can OEM for our clients.
CUSTOMIZED SERVICE
We will try its best to meet all kinds of clients' special requirements. And for new products that have not been into the market yet, we have our technical team to help the clients. All kinds of attachments such as roll paper clamp, side shifter and so on can be available.
Our Factory
We are first calss in Chinese forklift manufactures and top 20 in the world,with 130,000 square meters production area,over 500 employees,30,000 units forklift truc production capacity per year ,5000 sets export volume
 our R&D research is in Britain, and we invested over 600 million in fork lifter factory, use advanced equipments to realize over 90% automatic production, e.g.: welding robot.Â
Every forklift part is self produced; we have 5Â series and over 200 models to meet customers' different demands, we can do all kinds of lifting height mast according your different working conditions
Â
Product catalogue
We have all kinds of forklift , here is our forklift catalogue for your choice:
1)Diesel forklift truck capacity from 1.5ton to 16ton;
2) Electric forklift truck capacity from 1.5ton to 3.5ton;
3) LPG gas gasoline forklift truck capacity from 1.5ton to 7ton;
4) Warehouse equipment, includes electric pallet truck, electric reach truck, electric stacker, electric trailer
5) Other special function forklift, eg: cold warehouse electric forklift, explosion-proof forklift, renting business forklift.
Â
Covered Forklift In Container Shipping with Tool Box, Forklift Catalogue, Gloves and Forklift Operation and Maintenance Manuals, Fork Sleeves and Spare Parts together.
Packaging&Shipping 1*20'GP - 3 Units,     1*40'GP - 64 Units
Â
Contact us
Phone/Whatsapp/ :Â 0086-18753178627Â
Â
Facebook/youtube:wang cecile
Web:www.forklift.snsc-group.com Produts Description
1) with powerful Chinese XINCHAI 490/ original JAPAN ISUZU C240/MITSUBISHI S4S engine;Â
2) with auto electric hydraulic transmission by finger with TCM technology;Â
3) Duplex/triplex mast 3000-7000mm;
4) with copper radiator, Wide back mirroe/Led light/Warning lights/Luxury waist support seat/Cooper tank/ Lamp shade protection frame /Ramjet overhead guard/ /Tilt cylinder dust shield;
5) with a tool box and free spare parts;
6) with CE certificates, quality is guaranteed.
| Specifications | Unit | FD25 | |||
| 1 | Characteristics | Power | Â | diesel | |
| 2 | Rated Capacity | kg | 2500 | ||
| 3 | Center of load | mm | 500 | ||
| 4 | Lifting height | mm | 3000 | ||
| 5 | Free lifting height | mm | 135 | ||
| 6 | Forks L×W×H | mm | 1070x122x40 | ||
| 7 | Tilt Forward/Backward | . | 6/12 | ||
| 8 | Min.turning radius | mm | 2240 | ||
| 9 | Min.ground clearance(Mast) | mm | 110 | ||
| 10 | Overhead guard height | mm | 2120 | ||
| 11 | Height from seat to overhead guard | mm | 943 | ||
| 12 | Front overhang | mm | 473 | ||
| 13 | Perf | Max.traveling speed(loaded) | km/h | 19 | |
| 14 | Max.lifting speed(loaded/empty) | mm/s | 470/510 | ||
| 15 | Drawbar pull/Gradeability | kN/% | 17/20 | ||
| 16 | Dimensions | Overall length (without fork) | mm | 2570 | |
| 17 | Overall width | mm | 1175 | ||
| 18 | Mast lowered height | mm | 1990 | ||
| 19 | Mast extended height | mm | 4000 | ||
| 20 | Chassis | Tire | Front | Â | 7.00-12-12PR |
| 21 | Rear | Â | 6.00-9-10PR | ||
| 22 | Wheelbase | mm | 1600 | ||
| 23 | Tread width | Front/Rear | mm | 970/970 | |
| 24 | Curb weight | None-load | kg | 3750 | |
| 25 | Powertrain | Battery | Voltage/Capacity | V/Ah | 12/90 |
| 26 | Engine | Model | Â | XC490BPG | |
| 27 | Rated power | kw/r.p.m | 37/2650 | ||
| 28 | Rated torque | Nm/r.p.m | 148/2000 | ||
| 29 | Cylinder amount | Â | 4 | ||
| 30 | Bore×Stroke | mm | 90x100 | ||
| 31 | Displacement | Â | 2.54 | ||
| 32 | Fuel tank | L | 60 | ||
| 33 | Transmission | Â | 1/1 automatic transmission | ||
| 34 | Working pressure | MPa | 17.5 | ||
Quality Control
We use advanced equipments, eg: welding robot and others to realize over 95% automatic production line.Every
forklift part is produced by ourselves, our products are all well-designed and strictly tested, We traite  every process from  prepare materials- structure-painting-assambly to delivery to make customer's satisfaction.
VIP Solution
SNSC forklift can install different attachments to help your work, like paper roll clamp, side shifter, full free container mast, bale clamp, drum clamp, block clamp, fork positioner, tyre clamp, rotators, carton clamp, cabin, etc.
Our services
WARRANTY TIME:
The warranty period for forklift is 15 months or 2500 working hours begins from the forklift arrival date of oversea port, depends on which come first.
SPARE PARTS SERVICE:
We have free wearing parts to present you with the forklift.
Warranty period of Spare parts is 6Â months, begins from 30 days after shipment.
MAINTENANCE SERVICE
Our products are all well-designed and strictly tested. If any maintenance problem you can not handle, we can also offer training and maintenance services in our factory field or at your site.Your requirements will be handled promptly and appropriately.
OEM SERVICE
With the authorization of the brand, we can OEM for our clients.
CUSTOMIZED SERVICE
We will try its best to meet all kinds of clients' special requirements. And for new products that have not been into the market yet, we have our technical team to help the clients. All kinds of attachments such as roll paper clamp, side shifter and so on can be available.
Our Factory
We are first calss in Chinese forklift manufactures and top 20 in the world,with 130,000 square meters production area,over 500 employees,30,000 units forklift truc production capacity per year ,5000 sets export volume
 our R&D research is in Britain, and we invested over 600 million in fork lifter factory, use advanced equipments to realize over 90% automatic production, e.g.: welding robot.Â
Every forklift part is self produced; we have 5Â series and over 200 models to meet customers' different demands, we can do all kinds of lifting height mast according your different working conditions
Â
Product catalogue
We have all kinds of forklift , here is our forklift catalogue for your choice:
1)Diesel forklift truck capacity from 1.5ton to 16ton;
2) Electric forklift truck capacity from 1.5ton to 3.5ton;
3) LPG gas gasoline forklift truck capacity from 1.5ton to 7ton;
4) Warehouse equipment, includes electric pallet truck, electric reach truck, electric stacker, electric trailer
5) Other special function forklift, eg: cold warehouse electric forklift, explosion-proof forklift, renting business forklift.
Â
Covered Forklift In Container Shipping with Tool Box, Forklift Catalogue, Gloves and Forklift Operation and Maintenance Manuals, Fork Sleeves and Spare Parts together.
Packaging&Shipping 1*20'GP - 3 Units,     1*40'GP - 64 Units
Â
Contact us
Phone/Whatsapp/ :Â 0086-18753178627Â
Â
Facebook/youtube:wang cecile
Web:www.forklift.snsc-group.com
Light Emitting Diode (LED) is a kind of solid-state semiconductor device that can convert electric energy into visible light. It can directly convert electricity into light. The heart of the LED is a semiconductor wafer. One end of the wafer is attached to a bracket, the other end is connected with the positive pole of the power supply, so that the whole wafer is encapsulated by epoxy resin.
Semiconductor wafers consist of two parts, one is P-type semiconductor, in which holes dominate, and the other is N-type semiconductor, in which electrons dominate. But when the two semiconductors are connected, a P-N junction is formed between them. When the current acts on the chip through the wire, the electrons are pushed to the P region, where the electrons recombine with the holes and then emit energy in the form of photons, which is the principle of LED lamp luminescence. The wavelength of light, the color of light, is determined by the material that forms the P-N junction.
We supply big range of such LED Parts, especially for light
Procedure
Casting, Die Casting and machining
B. Main particulars
|
|
MAIN PARTICULARS |
|
Material |
Carbon steel(20#-60#, S235-S355-), Alloy steel(4140,4340,42CrMo, -), stainless steel, aluminum alloy, zinc alloy, cast iron, ductile Iron or other specified |
|
Standard |
ASTM, ASME, DIN, JIS, ISO, BS, API, EN |
|
Certificate |
ISO9001 |
|
Tolerance |
Up to +/- 0.002mm |
|
Dimension |
As per drawing, as large as we can |
|
Processing |
CNC turning, CNC turning and milling compound processing, 3/4/5 axis CNC machining center, wire-cutting, EDM, grinding etc. |
|
Finishing surface |
Machined surface with oil, blasting and painting, anodize, polishing, powder painting, electrophoretic coating- |
|
Marking |
as per clients` requirements |
|
Inspection |
material, construction, dimension, heat treatment, hardness, NDT |
|
Quality |
ISO9001, PPAP control production |
|
Lead time |
3-20 days for sample, consult with customer for mass production |
|
Delivery |
Express for sample, ocean shipping/air for mass production |
|
Our Capabilities |
CNC machining, CNC center machining, drilling, milling, turning, grinding, tapping, boring |
|
Engineering & manufacturing services |
R&D process, tooling and gauging design, product design Integrated CAD/CAM system, test and measuring |
|
Others |
Recyclable, in line with environmental requirements and standards, and reliable |
C. Construction
Construction by casting, die casting and machining
D Workmanship
The workmanship have good production practice. Care are taken to ensure High accuracy and smooth surfaces
E. Certificates
- Material certificates
- Measuring reports
- Inspection protocol
- NDT reports
- Fixed certificate: ISO9001 certificate
Our service
Besides above the general specifications, we can also supply some specific machining parts as clients' requirements.
Package and shipping
Export cartons, pallets, wooden cases, Polybags
container package and container transportation
LED Parts
LED PartsLED Parts,Car Electronics Parts,Electronics Components Parts,Computer Electronics Parts
Shinvast Industry Ltd , https://www.shinvastindustry.com