Outstanding features of our machine:Â
1. Most of the air is circulated inside the oven, with high hot efficiency, and the energy can be saved;Â
2. The usage of forced ventilation, adjustable sub-box with the wind plates, can dry materials evenly;Â
3. The noise of our machine is slow and low, and has a temperature control box;Â
4. Using our machine can dry a lot of materials, can meet your different needs.Â
What is the technology used in our machine?Â
It uses the electricity as heating source, by the heating of the heater, a lot of hot air circulates in the oven and then comes into the cabinet through the suppliment of continuous fresh air from the inlet, and then continuously discharged from the moist discharge port. By doing this, it increases the heat transfer effect, so that the moisture content of the materials in the oven gradually reduce.Â
The oven produced is equipped with centrifugal fan and automatic temperature control system, the entire circulatory system is fully closed, so that the thermal efficiency of the oven increases from 3%-7% of the traditional drying room to 35%-40%, and the highest thermal efficiency can be up to 70%! There is an adjustable air board in the oven, by using forced ventilation, can dry the materials evenly!Â
Model No. | Number of Trolley | Number of Plates |
Motor | Area of the plates | Capacity each batch | Dimension (m) | Heating source |
WSHG-1 | 1 | 24 | 9kw |  5.76m² | 60kg | 1.55*0.8*2.2 | Electric   or gas |
WSHG-2 | 2 | 48 | 12kw | 11.52m² | 120kg | 2.1*1.1*2.3 | |
WSHG-4 | 4 | 96 | 18kw | 23.04m² | 220kg | 2.1*2.0*2.3 | |
WSHG-6 | 6 | 144 | 22kw | 34.56m² | 340kg/8h | 2.6*2.1*2.3 | |
WSHG-8 | 8 | 192 | 30kw | 46.08m² | 440kg/8h | 4.0*2.0*2.3 |
A Heat Exchanger Unit is a device used to transfer thermal energy (heat) between two or more fluids. Heat exchangers are used in a wide variety of applications, such as heating and cooling of buildings, industrial processes, and power generation.
The heat exchanger unit essentially consists of heat exchangers such as Plate Heat Exchanger, Shell and Plate Heat Exchanger, or other counterpart, a circulating pump, a fluid make-up pump, thermometers, a filter, sensors, a pipeline and valves. It is also possible to design a temperature control system, pressure stabilization system, variable-frequency controller, heat metering and communication controller, etc. according to the client`s requirements.
Big advantage of heat exchanger unit is that, by adopting a modularized structure, it maximizes each component`s function to the most. The precise control for heat exchange process also saves time and efforts for maintenance and installation.
Feature is that intelligent control, excellently energy-saving, high automation and easy to operate, high cost performance and wide application.
Heat Exchanger Unit,Heat Exchanger Ac Unit,Heat Exchanger Package Unit,Heat Recovery Ventilation Unit
Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.heatexchangerjm.com