Motor soft starter 485 communication control box subscription

The operation panel of the 485 communication control box is shown in Fig. 4-9-1. Its external dimensions are “68mm×100mm×17mm” and the opening size is “65mm×97mm”.

The following are the special functions and usage instructions of the 485 communication control box. For the functions and descriptions similar to the normal keyboard controller, see Chapter 18, Section 18.

For the use of the 485 communication control box, see Table 4-9-2 to Table 4-9-4.

Figure 4-9-1 485 Communication Control Box

Table 4-9-2 Special keys

button	Key name	Instructions
	"Mode" key	Used in conjunction with the "SET" button, the control box shows the communication address "d×××"
	"Settings" button	Used in conjunction with the "Mode" key, the control box displays the communication address "d×××"; Press the "Settings" button under the "dxxx" display status, and the control box displays the contents of the corresponding inverter.
	"Up" key	Press “Rise”, “Down” key in “d×××” display state to select other communication address
	"Down" key

Table 4-9-3 Special Operation Instructions

Table 4-9-4 Special panel display contents and description