High Frequency Induction Heating Brazing Welding Machine Hardening, Forging

Posted on

Model NO.: GHF series
Structure Material: Metal Material
Heat Transfer Surface: Plate Heat Exchanger
Principle: Regenerative Heat Exchanger
Mixing Heat Exchanger Type: Cooling Tower
Core: Aluminum Heat Exchanger
Trademark: geelly china
Transport Package: Wooden
Origin: China
HS Code: 85144000
Model NO.: GHF series
Structure Material: Metal Material
Heat Transfer Surface: Plate Heat Exchanger
Principle: Regenerative Heat Exchanger
Mixing Heat Exchanger Type: Cooling Tower
Core: Aluminum Heat Exchanger
Trademark: geelly china
Transport Package: Wooden
Origin: China
HS Code: 85144000

Application:

1, Brazing: it can be used for the brazing of various hardware cutting tools, diamond tools including diamond circular saw from diameter 300-2500mm, abrasive tool, drilling tool, alloy saw blade, hard alloy cutter, milling cutter, reamer, planning tool and solid center bit etc. It is suitable to used for the brazing of circular saw and other tools, usually 9 to 15 seconds is needed to braze one diamond blade.
2, Heat treatment: heat treatment of small parts
3, Melting: Melting below 2KG for gold, sliver, copper, brass, steel and iorn etc4,Forging,
5, Hardening
6, quenching
7,Annealing


Main characteristics:
1, MOSFET and Inverting technologies of First generation been used;
2, Simple structure and light weight;
3, Simple to operate, A few minutes is enough to learn it;
4, Simple to install, Installation can be done by unprofessional person very easily;
5, Advantages of the model with timer: The power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability;

Installing Desire
1, power supply wire: 6mm2 soft copper; Ground wire 4mm2 soft copper;
2, cooling water desire: Clean and not easy to scale, Inlet water temperature 25-36degree';
3, cooling water systerm: Running water; Circulating water from a pump to a tank; Use an industry refrigerate machine.

Some application exeample 
High Frequency Induction Heating Brazing Welding Machine Hardening, Forging
Model Input power Frequency Input voltage Duty cycle Heating current Retaining current Time control Size CM/weight
GHF-30B 30KW 30-80KHZ
30-80KHZ		  
380V,415V,440V,
50/60Hz, three-phase
 		  
100%		  
10-70A		     Generator:
60*26*50/28KG
Transformer:
47*27*40/26KG
GHF-30AB 30KW 10-70A 1--99s
GHF-40B 40KW 10-90A     Generator:
60*26*50/36KG
Transformer:
47*27*40/33KG
GHF-40AB 40KW 10-90A  
1--99s
GHF-50B 50KW 10-105A    
 		 Generator:
60*26*50/40KG
Transformer:
51*27*40/39KG
GHF-50AB 50KW 10-105A 1--99s
Cable lengthfrom generator to transformer is 2 meters, and max. length is 6 meters

FAQ
Q: What's your advantage? Why we choose you?

A: 1,Our factory has over 15 years  induction line production experience, we have rich experience in the production and design the induction technology machine for customers.

 2, Great production capacity Sustainable Supply . According to customer requirements, We support the customized including the packing

3,  We use 100% new materials and the striclty control for the  production process, in consequence our defective rate is lower than 0.01%

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: How about warranty

A: 12 Months

Q: Do you test all your goods before delivery?
A: Sure, we double test all our machines before delivery

For more questions or details about us and our machines, please contact us as below,

High Frequency Induction Heating Brazing Welding Machine Hardening, Forging
 

Application:

1, Brazing: it can be used for the brazing of various hardware cutting tools, diamond tools including diamond circular saw from diameter 300-2500mm, abrasive tool, drilling tool, alloy saw blade, hard alloy cutter, milling cutter, reamer, planning tool and solid center bit etc. It is suitable to used for the brazing of circular saw and other tools, usually 9 to 15 seconds is needed to braze one diamond blade.
2, Heat treatment: heat treatment of small parts
3, Melting: Melting below 2KG for gold, sliver, copper, brass, steel and iorn etc4,Forging,
5, Hardening
6, quenching
7,Annealing


Main characteristics:
1, MOSFET and Inverting technologies of First generation been used;
2, Simple structure and light weight;
3, Simple to operate, A few minutes is enough to learn it;
4, Simple to install, Installation can be done by unprofessional person very easily;
5, Advantages of the model with timer: The power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability;

Installing Desire
1, power supply wire: 6mm2 soft copper; Ground wire 4mm2 soft copper;
2, cooling water desire: Clean and not easy to scale, Inlet water temperature 25-36degree';
3, cooling water systerm: Running water; Circulating water from a pump to a tank; Use an industry refrigerate machine.

Some application exeample 
High Frequency Induction Heating Brazing Welding Machine Hardening, Forging
Model Input power Frequency Input voltage Duty cycle Heating current Retaining current Time control Size CM/weight
GHF-30B 30KW 30-80KHZ
30-80KHZ		  
380V,415V,440V,
50/60Hz, three-phase
 		  
100%		  
10-70A		     Generator:
60*26*50/28KG
Transformer:
47*27*40/26KG
GHF-30AB 30KW 10-70A 1--99s
GHF-40B 40KW 10-90A     Generator:
60*26*50/36KG
Transformer:
47*27*40/33KG
GHF-40AB 40KW 10-90A  
1--99s
GHF-50B 50KW 10-105A    
 		 Generator:
60*26*50/40KG
Transformer:
51*27*40/39KG
GHF-50AB 50KW 10-105A 1--99s
Cable lengthfrom generator to transformer is 2 meters, and max. length is 6 meters

FAQ
Q: What's your advantage? Why we choose you?

A: 1,Our factory has over 15 years  induction line production experience, we have rich experience in the production and design the induction technology machine for customers.

 2, Great production capacity Sustainable Supply . According to customer requirements, We support the customized including the packing

3,  We use 100% new materials and the striclty control for the  production process, in consequence our defective rate is lower than 0.01%

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: How about warranty

A: 12 Months

Q: Do you test all your goods before delivery?
A: Sure, we double test all our machines before delivery

For more questions or details about us and our machines, please contact us as below,

High Frequency Induction Heating Brazing Welding Machine Hardening, Forging
 

Mini Cooler

Ideally, these usb mini cooler are powered with USB cable, meaning you can use them with your computer or adapt. If you are an outdoor enthusiast or work in an office, these USB mini cooler are for you if you have powerbank.

We make portable rechargeable USB fan, Mini cooloer, Jet engine USB fan with CE/GS approvalled by TUV.

Welcome to OEM

thank you

Small Cooler,Mini Water Cooler,Best Small Coolers,Small Portable Cooler

Fenry Manufacturing Co., Ltd , https://www.fenry-fan-heater.com