YB Series Self-Priming Rotary Vane Pump is with by-pass valve built-in.The pump uses a Rotor with sliding vanes to drive the liquid transferring.
The material of construction is Nodular Cast Iron with Self-Lubricating Vanes.
Due to its superior performance, the pump can handle viscous and volatile liquid and require less horsepower than other equivalent pumps.
The Pump has its obvious advantage in the transmission of high flow at low revolution.
Flow Rate
| Model No. | SIze | Speed at 650 Per RPM the Flow Rate | peed at 650 Per RPM the Flow Rate |
| YB-50 | 50mm 2" | 56G/Min or 210L/Min | 40G/Min or 150L/Min |
| YB-65 | 65mm 2.5" | 103G/Mim or 390L/Min | 82G/Min or 310L/Min |
| YB-80 | 80mm 3" | 200G/Min or 760L/Min | 160G/Min or 600L/Min |
| YB-100 | 100mm 4" | 505G/Min or 1900L/Min | 405G/Min or 1530L/Min |
Application
Road Fuel Tanker Truck
Fleet Refueling
Lube Oil
Aviation Refuelers
Transmission of pertrochemicals, Gasolines, Diesel, Biofuel, Solvent, etc.
Installation
With Cardan staff or hydraulic motor, the pump can be installed on oil tank trucks.And also it can be installed on metal baseplates with motor or diesel engine, using for high flow fuel dispenser and floating fuel equipment which are compose of pumps and flowmeters. Equiped with Teflon seals, the pump can als transfer a wide variety of solvent in the pertrochemicals indurty.
Others:
Only Pump is Available
Pump can be made at Diesel Engine Drive, V-Belt Drive, Coupling Drive.
Â
LINA Disassemble Dispersion Kneader
LINA disassemble dispersion kneader provides excellent cleaning performance especially for sticky materials. Without affecting dispersion kneader's mixing effect, the rotor can be separated easily from the mixing chamber. This type of dispersion Internal Mixer is suitable for a variety of materials and able to provide a better performance dust seal for preventing material leakage.
Special design for CIM & MIM
1. Higher cleanness: Clean up the material without dead corners; the mixing chamber and rotors of the dispersion kneader can be separated completely; All surface that directly contact with the material is mirror polished, which ensure all the materials easy to clean without stickiness.
2. Wearable inner cavity: Imported special new alloy steel and vacuum heat treatment are adopted. Strong wear resistance, resistance to horizontal erosion, corrosion resistance and high glossy finish effects are achieved.
3. Adjustable rotor speed ratio: The speed ratio of rotors is adjustable, which target at some special material function requirements and achieve best dispersion effect and efficiency. The kneader with adjustable rotor speed ratio is designed especially for those materials that are sensitive of temperature/high require of different temperature/fast change rate of temperature/fast and span molecular chain diversification.
4. Temperature control system: A lot of trials report that stage temperature control has the essential effect of ceramics` color difference.
5. PLC intelligent control system: 1. Real-time data record and export of kneading time, temperature (mixing chamber and front/rear rotors), ram pressure, current, torque and recipe code. 2. The control system can be set up to 20 mixing steps, save 20 recipe spaces. 3. The control system is capable of remote importing of the process recipe and data monitoring, and communicating with MES via Ethernet communication interface. 4. An Ethernet communication interface and 20% of the control points are reserved. Touch screen is provided.
Specifications of LINA Disassemble Dispersion kneader
Type
Size (L)
Dimension (mm)
Weight (kg)
LN disassemble dispersion kneader
0.5
1600*900*1900
800
1
1600*900*1900
800
2
1600*900*2000
900
3
1600*900*2100
900
5
1900*1000*2100
1200
10
2200*1350*2150
2500
Disassemble Dispersion Mixer,Disassemble Kneading Machines,Rubber Disassemble Dispersion Mixer,Ceremic Disassemble Mixer
LINA Machinery Industrial Co.,Ltd , https://www.linakneader.com