If the truck crane is used in areas with high air humidity and large temperature difference between day and night, there will be problems with water in the air path. For example, the problem of water in the gas pipelines in Sichuan and Qinghai is more prominent. Air in the air path will cause rust in the Valve Body, damage the solenoid valve, and the brake performance will be affected; the water in the air pipe will overflow through the air pipe interface and spray on the circuit board to burn the circuit board of the machine; in the winter, the valve body will freeze, The problem of car brake failure, this situation will appear more clearly in the northern region.
Normal driving vehicles are hung in mountainous areas and hilly areas, especially in the form of downhill roads or frequent traffic jams, and the distance between vehicles is small. It is also necessary to prevent other vehicles from jumping in the queue, and braking delays caused by water in the gas path when frequent starting and braking are required. It will feel very obvious. In general, the desiccating effect of the dryer air intake tube is poor, the compressed air is insufficiently cooled before entering the desiccator, the air compressor is not drained for a long time, the air tank is not drained, and the life of the desiccator may be reduced under certain specific climatic conditions. In case of failure, it will cause water accumulation in the brake pipe, resulting in reduced braking performance.
Normal driving vehicles are hung in mountainous areas and hilly areas, especially in the form of downhill roads or frequent traffic jams, and the distance between vehicles is small. It is also necessary to prevent other vehicles from jumping in the queue, and braking delays caused by water in the gas path when frequent starting and braking are required. It will feel very obvious. In general, the desiccating effect of the dryer air intake tube is poor, the compressed air is insufficiently cooled before entering the desiccator, the air compressor is not drained for a long time, the air tank is not drained, and the life of the desiccator may be reduced under certain specific climatic conditions. In case of failure, it will cause water accumulation in the brake pipe, resulting in reduced braking performance.
In the crushing work for jaw crusher, the most consumed part of is the crusher jaw plate. The wear speed of the upper and lower parts of jaw plate is different. The lower part wears faster than the upper part. When the crusher works, the jaw plate directly collision with material and bears the huge crushing force and the friction of the material, the service life of the tooth plate is directly related to the working efficiency and production cost of the jaw crusher.
Jaw Crusher Parts,Jaw Plate,Crusher Parts,Fixed Jaw Plates
Baizhu Network Technology Co., Ltd. , https://www.baizhucasting.com