Cao Kechang, Cooper Tire's global vice president and general manager of the Asia-Pacific region, has predicted that in the next 10 years, Chinese tire companies will integrate through mergers and acquisitions and other means to 10 or less. A few days ago, Tire World Net conducted a questionnaire survey on the relevant issues and conducted statistics on the survey results as of December 23.
The survey results show that most people recognize the prediction made by Cao Kechang and believe that the merger and reorganization of the tire industry is the general trend.
“Building channels is expensive. There are not many families that can do it separately. It is different when they are united.†Cao Kechang gave a reasonable explanation of his predictions.
An industry expert told the Tire World Network editor that there are about 300 tire companies registered in China, and there are about 80 companies with a certain operating scale, and about 30 of them are truly “on the benchâ€. "The United States tire market is only Goodyear and Cooper two companies, the EU's 25 member countries but also only 6,7. Chinese tire companies should not be more, but to be fine." The expert said so.
According to Song Libo, professor-level senior engineer of China United Rubber Co., Ltd., an industry that wants to develop must move ahead and mergers are inevitable. Small tire factory is difficult to survive, technical requirements can not be reached, not only supporting difficult, retail is also very difficult to stand.
Another 39% of the voters believe that Cao Kechang’s forecast is unlikely to happen because the situation in the Chinese tire industry is more complicated and cannot simply replicate the model of the United States, the European Union and other countries and regions.
In recent years, domestic cases of mergers and reorganizations have mostly occurred among foreign-funded enterprises, while there have been few cases among domestic enterprises. In response to this phenomenon, more than half of the voters believe that this is mainly due to the complementary advantages of Chinese-foreign mergers and reorganizations; 26% of the voters believe that because domestic companies have similar strengths, it is not easy to merge groups; 22% of voters believe that The main reason is that local governments do not support mergers and reorganizations.
According to sources, the acquisition of the shares of Shenyang Peace Tire and Jinyu in the previous round of the Race Wheels share may also include the Shandong Hengyu Group, with the aim of building China's largest tire group. This will probably open up the integration and reorganization of the Chinese tire industry.
How can domestic tire companies do mergers and reorganizations and promote industry consolidation? Fifty-seven percent of voters believe that improving their capabilities is the key.
"Not just being merged, many bad companies will be eliminated, valuable talents will 'come in,' and there will be no chance of doing a bad job of 'merging'." An insider expressed this view .
According to 17% of voters, they should open their minds and say, "When it's time to get it, it's time to get it." According to a commentator, the tire market is currently sluggish, and the acquisition cost of the company is low. At this time, the acquisition can be described as “just in timeâ€.
Another 17% of voters believe that mergers and acquisitions need national policy promotion; 9% of voters think that mergers and reorganizations need local government support.
Cao Kechang, Cooper Tire's global vice president and general manager of the Asia-Pacific region, has predicted that in the next 10 years, Chinese tire companies will integrate through mergers and acquisitions and other means to 10 or less. A few days ago, Tire World Net conducted a questionnaire survey on the relevant issues and conducted statistics on the survey results as of December 23.
The survey results show that most people recognize the prediction made by Cao Kechang and believe that the merger and reorganization of the tire industry is the general trend.
“Building channels is expensive. There are not many families that can do it separately. It is different when they are united.†Cao Kechang gave a reasonable explanation of his predictions.
An industry expert told the Tire World Network editor that there are about 300 tire companies registered in China, and there are about 80 companies with a certain operating scale, and about 30 of them are truly “on the benchâ€. "The United States tire market is only Goodyear and Cooper two companies, the EU's 25 member countries but also only 6,7. Chinese tire companies should not be more, but to be fine." The expert said so.
According to Song Libo, professor-level senior engineer of China United Rubber Co., Ltd., an industry that wants to develop must move ahead and mergers are inevitable. Small tire factory is difficult to survive, technical requirements can not be reached, not only supporting difficult, retail is also very difficult to stand.
Another 39% of the voters believe that Cao Kechang’s forecast is unlikely to happen because the situation in the Chinese tire industry is more complicated and cannot simply replicate the model of the United States, the European Union and other countries and regions.
In recent years, domestic cases of mergers and reorganizations have mostly occurred among foreign-funded enterprises, while there have been few cases among domestic enterprises. In response to this phenomenon, more than half of the voters believe that this is mainly due to the complementary advantages of Chinese-foreign mergers and reorganizations; 26% of the voters believe that because domestic companies have similar strengths, it is not easy to merge groups; 22% of voters believe that The main reason is that local governments do not support mergers and reorganizations.
According to sources, the acquisition of the shares of Shenyang Peace Tire and Jinyu in the previous round of the Race Wheels share may also include the Shandong Hengyu Group, with the aim of building China's largest tire group. This will probably open up the integration and reorganization of the Chinese tire industry.
How can domestic tire companies do mergers and reorganizations and promote industry consolidation? Fifty-seven percent of voters believe that improving their capabilities is the key.
"Not just being merged, many bad companies will be eliminated, valuable talents will 'come in,' and there will be no chance of doing a bad job of 'merging'." An insider expressed this view .
According to 17% of voters, they should open their minds and say, "When it's time to get it, it's time to get it." According to a commentator, the tire market is currently sluggish, and the acquisition cost of the company is low. At this time, the acquisition can be described as “just in timeâ€.
Another 17% of voters believe that mergers and acquisitions need national policy promotion; 9% of voters think that mergers and reorganizations need local government support.
PVC Edge Banding For Furniture
The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
Furniture edge banding is a material for protecting, decorating and beautifying the section of furniture panels. It can make a piece of furniture show the overall effect of clear wood grain and colorful.
PVC furniture edge banding is relatively light, which is relative to metal and plexiglass. The reason for the lightness is not because it is a polymer compound, but because they are organic compounds, which are composed of carbon, hydrogen, oxygen, and chlorine. And other lighter elements.
The material of pvc furniture edge banding is plastic, which is easy to process. Plastic has plasticity, that is, it deforms after heating or pressurizing, and maintains its original shape after the temperature drops or the pressure disappears. It can be processed into edge bands of their respective shapes by extrusion and other methods, such as T-shaped edge bands, H-shaped edge bands, D-shaped edge bands, V-shaped edge bands, I-shapes, and so on.
pvc furniture edge banding is of high quality and low price, and the price of plastic is far less than that of metal.
PVC Edge Banding For Furniture,Pvc Edge Banding For Furniture, Edge Banding For Furniture,Pvc Edge Banding Tape
Henan Shunbang Chemical Industry CO.,Ltd , https://www.sblubricant.com