- Model NO.: CC1358
- Trademark: Super Care
- Specification: Standard
- HS Code: 3506100090
- Material: PP, Metal, Rubber
- Transport Package: Standard Export Carton
- Origin: Ningbo, China
Type: | Tyre Repair Kit |
Item Number: | CC1358 |
Material: | PP,Metal,Rubber |
Size: | Standard |
MOQ: | 5,000pcs |
Logo: | Customized |
Color: | Usually,black |
Usage: | For repair tubeless tire |
Sample Time: | 3-5days |
Production Time: | 35days after deposit |
Payment Term: | T/T,L/C,D/P,WESTERN UNION |
Why choose us?
 1. The first step is to locate the offending foreign object in your tire.
  2. Remove the Object
  3. Put 2-3 drops of the rubber cement on the tip of the reamer and insert the reamer into the puncture. Work the reamer in and   out while twisting to clean and prep the puncture and apply the cement. This process will also enlarge the hole to that the           plug will fit through; because of this the first couple of insertions can be difficult. Repeat this process 2-3 times to make sure t     the puncture is clean and that there is enough cement in the wound.Â
4. Take each end of the repair string(about 70mm long), this is the plug, and roll the center of the string into the needle eye.       Apply 2-3 drops of rubber cement to the end of the needle andÂ
Push the needle and repair string into the puncture (this can be tricky with smaller punctures) until only about a quarter-inch of the strip is sticking out of the tire's surface.
 5. Make a 1/4 turn with the  handle and pull the needle probe out of the tire. The patch should remain in the tire when you remove the probe.Trim the repair strip that is sticking out of the tire down to about 1/8 of an inch.
6.Use an air compressor to replace any air that may have leaked out of the tire. Your tire should be re-inflated and ready to get back onto the road.
Notice
Please note that this repair kit should not be used to fix tyres with punctures bigger than 1/4'' and should only be used as temporary safely. Then you can repair your tire permanently.
Do not try to repair any sidewall puncture.
Contact us
Ningbo Super Clean Co.,Ltd.
ADD: No.1, HouCang Industry Zone,
        West Section Yinxian Road, Ningbo China(315153)
TEL:0086-574-89020080,89020081
FAX:0086-574-88255300
Mobile:0086-13858225192
www.nbsuperclean.com
Â
Â
Â
Automatic Vacuum Forming Machine
Automatic Vacuum Forming Machine,Vacuum Molding Machine ,Vacuform Machine ,Vacuum Molding
Filling Machine Co., Ltd. , http://www.nbsealingmachine.com