Model NO.: SG-01
Materials: Silicone Rubber
Color: Be Available
Hardness: 30-85 Shore a
Temperature: -40 - 230
Anti Fire: Ulv94V0
Dust Proof: IP6
Water Proof: IP6
Special: 3m Gumming Tape
Materials Report: SGS, UL94vo
Production Standard: ISO9001:2008
Trademark: Better
Transport Package: PE Bags, Carton Boxes
Specification: CE, SGS, UL
Origin: Xiamen, China
HS Code: 3926909090
Model NO.: SG-01
Materials: Silicone Rubber
Color: Be Available
Hardness: 30-85 Shore a
Temperature: -40 - 230
Anti Fire: Ulv94V0
Dust Proof: IP6
Water Proof: IP6
Special: 3m Gumming Tape
Materials Report: SGS, UL94vo
Production Standard: ISO9001:2008
Trademark: Better
Transport Package: PE Bags, Carton Boxes
Specification: CE, SGS, UL
Origin: Xiamen, China
HS Code: 3926909090
Silicone/EPDM/FKM/NBR/Viton Rubber Washer Plunger Seal, Lip Seal, also called Piston Seal, Radial Seal & Rod Seal, consists of outside diameter lip and inside diameter lip, which is used for fluid seals and specifically designed as piston seals to work in pneumatic and hydraulic cylinder applications, also known as Rubber Pneumatic seals and Rubber Hydraulic Seals.
Silicone Lip seal is a self-sealing ring, it relies on the lip and close to the surface of the sealing coupling, obstructing the leakage channel to obtain the sealing effect. The working pressure of the lip seal is the sum of the pre-pressing force and the fluid pressure. When the pressure of the sealing medium is increased, the lip is distracted and more closely fit with the sealing surface, so that the sealing performance be enhanced further. In addition, the lip edge also has the scraping oil function which also enhance the sealing performance of the seal.
Rubber Lip Seal is made of high grade silicone, liquid silicone rubber(LSR), NBR, FKM, PU Rubber, etc, which mainly produced by Silicone Rubber Compression Mold tooling or LSR injection Molding (LIM) with middle mold plates.
Rubber Lip Seal & Rod Seals application environment and working speed ranges:
Working pressure: < 25 MPa
Working temperature: -40~+120ºC
Medium: hydraulic oil, water, air
NBR: 0.01~0.6 m/s
FKM: 0.05~0.3 m/s
PU rubber: 0.01~1 m/s
Â
Lip seals are mainly used in reciprocating seals, and compare with extrusion seals, such as O-ring, the reciprocating seal makes lip seals better overall performance, and longer service life.
| Description | Y-shaped seal(Lip Seal) | O-ring seal(Extrusion Seal) |
| Advantage | Seal section size is small, the installation groove can be designed as a monolithic groove; groove processing, seal installation easy,can be used as two-way seal (dual pressure) | Excellent seal performance; Low friction at low pressure; Automatically compensate after small amount of wear. |
| Disadvantage | Poor sealing performance; Easy to roll and twist, causing damage easily; The lower friction margin,the poorer sealing performance |
One-way seal; Complex sealing structure,large size; Cause oil pressure between two seals; |
| Main Application | Small size slide valve; Piston and rod seals which allow a small amount leakage |
Piston and rod seals which require high seal performance. |
Xiamen Better Silicone Rubber Co.,ltd advantages for Silicone Lip Seals Production
1. Precision Own Mold-Making Technology since 1998, one stop service for silicone rubber compression molded components, plastic injection molded and liquid silicone rubber molding components.
2. In-depth knowledge of Rubber Lip Seals materials molded
3. In-depth knowledge of silicone rubber Rod Seals mold-making technology and Piston Seal molded technology.
For Plunger Seal & Piston Rod purchasing, the following factors should be comprehensively considered:
Piston Rod movement speed
Piston Rod's starting friction
Piston Seal Working pressure
Rod Seal Working temperature
Plunger Seal working medium viscosity
Allowable tolerance for leakage
Lip Seal's groove size
Rod Seal's fit tolerance for Piston Rod
Â
Custom Plunger Seals for Fast quotation:
1. Offer 2D & 3D designs drawings, samples or tell us your ideas.
2. Materials demands: Solid Silicone, Liquid silicone rubber
3. Materials Grade demands: food grade & medical grade materials, high elastic materials
4. Hardness & Durometer demands: 10-80 Shore A ( Durometer)
5. Working Environment & Usage: Working temperature, flow chemical environment and Sealing or Open Pressure Demands & Testing etc.
6. Production environment Demands: If need clear room
7. Package Requirement: If need Air in packing bag to prevent deformation or damage etc.
 Silicone/EPDM/FKM/NBR/Viton Rubber WasherÂ
Plunger Seal, Lip Seal, also called Piston Seal, Radial Seal & Rod Seal, consists of outside diameter lip and inside diameter lip, which is used for fluid seals and specifically designed as piston seals to work in pneumatic and hydraulic cylinder applications, also known as Rubber Pneumatic seals and Rubber Hydraulic Seals.
Silicone Lip seal is a self-sealing ring, it relies on the lip and close to the surface of the sealing coupling, obstructing the leakage channel to obtain the sealing effect. The working pressure of the lip seal is the sum of the pre-pressing force and the fluid pressure. When the pressure of the sealing medium is increased, the lip is distracted and more closely fit with the sealing surface, so that the sealing performance be enhanced further. In addition, the lip edge also has the scraping oil function which also enhance the sealing performance of the seal.
Rubber Lip Seal is made of high grade silicone, liquid silicone rubber(LSR), NBR, FKM, PU Rubber, etc, which mainly produced by Silicone Rubber Compression Mold tooling or LSR injection Molding (LIM) with middle mold plates.
Rubber Lip Seal & Rod Seals application environment and working speed ranges:
Working pressure: < 25 MPa
Working temperature: -40~+120ºC
Medium: hydraulic oil, water, air
NBR: 0.01~0.6 m/s
FKM: 0.05~0.3 m/s
PU rubber: 0.01~1 m/s
Â
Lip seals are mainly used in reciprocating seals, and compare with extrusion seals, such as O-ring, the reciprocating seal makes lip seals better overall performance, and longer service life.
| Description | Y-shaped seal(Lip Seal) | O-ring seal(Extrusion Seal) |
| Advantage | Seal section size is small, the installation groove can be designed as a monolithic groove; groove processing, seal installation easy,can be used as two-way seal (dual pressure) | Excellent seal performance; Low friction at low pressure; Automatically compensate after small amount of wear. |
| Disadvantage | Poor sealing performance; Easy to roll and twist, causing damage easily; The lower friction margin,the poorer sealing performance |
One-way seal; Complex sealing structure,large size; Cause oil pressure between two seals; |
| Main Application | Small size slide valve; Piston and rod seals which allow a small amount leakage |
Piston and rod seals which require high seal performance. |
Xiamen Better Silicone Rubber Co.,ltd advantages for Silicone Lip Seals Production
1. Precision Own Mold-Making Technology since 1998, one stop service for silicone rubber compression molded components, plastic injection molded and liquid silicone rubber molding components.
2. In-depth knowledge of Rubber Lip Seals materials molded
3. In-depth knowledge of silicone rubber Rod Seals mold-making technology and Piston Seal molded technology.
For Plunger Seal & Piston Rod purchasing, the following factors should be comprehensively considered:
Piston Rod movement speed
Piston Rod's starting friction
Piston Seal Working pressure
Rod Seal Working temperature
Plunger Seal working medium viscosity
Allowable tolerance for leakage
Lip Seal's groove size
Rod Seal's fit tolerance for Piston Rod
Â
Custom Plunger Seals for Fast quotation:
1. Offer 2D & 3D designs drawings, samples or tell us your ideas.
2. Materials demands: Solid Silicone, Liquid silicone rubber
3. Materials Grade demands: food grade & medical grade materials, high elastic materials
4. Hardness & Durometer demands: 10-80 Shore A ( Durometer)
5. Working Environment & Usage: Working temperature, flow chemical environment and Sealing or Open Pressure Demands & Testing etc.
6. Production environment Demands: If need clear room
7. Package Requirement: If need Air in packing bag to prevent deformation or damage etc.
Â
Most kinds of plastics could be processed by plastic pyrolysis machines.
the main plastics will be PP PE with high oil output
PVC or PET is not suitable for pyrolysis machines
there will be Cl generated from its process
when met with water, there will be HCL,
it is harmful to reactor and all the whole plastic pyrolysis system.
the main process is that by heating the reactor directly, plastics will be pyrolysised into oil gas;
condensers or cooling pipes will cool the gas down into liquid oil with the help of recycling water;
then the rest gas which could not be cooled down into liquid oil will be recycled into reactor heating system; after oil gas coming out completely, stop heating the reactor, and cool down reactor below 70 degrees; then can open the door and discharge carbon black automatically...
there are models with capacities from 5tons to 20tons per batch
LN-2200-6000 capacity of 5-6ton
LN-2200-6600 capacity of 7-8ton
LN-2200-8000 capacity of 9-10ton
LN-2600-6600 capacity of 10-12ton
LN-2600-8000 capacity of 12-14ton
LN-2800-6000 capacity of 10-12ton
LN-2800-6600 capacity of 12-14ton
LN-2800-8000 capacity of 15-20ton
if cut into smaller pieces, it could process more.
the whole process includes feeding plastics into pyrolysis reactor;
then heating the reactor and oil gas coming out for some time;
cool down the reactor; at last open the door and discharge the carbon blacks...
Waste Plastic Pyrolysis Machine
Waste Plastic Pyrolysis Machine,Plastic Pyrolysis Machine,Plastics Pyrolysis Equipment,Scrap Plastic Pyrolysis Machine
Henan Lanning Technology Co., Ltd , http://www.lanningrecycling.com