Rubber Encapsulated Wedge Gate Valve

Posted on

  • Model NO.: G-001
  • Material: Ductile Iron
  • Pressure: Low Pressure
  • Seal Surface: Parallel Gate Valve
  • Usage: Flow Control
  • Application: Industrial Usage, Water Industrial Usage
  • Trademark: TFW
  • Specification: CE
  • HS Code: 84818040
  • Type: Direct-acting
  • Connection Form: Flange
  • Actuator: Manual
  • Thread Position of Valve Rod: Inside Gate Valve
  • Standard: DIN
  • Size: Dn50-Dn2000
  • Transport Package: Plywood Case
  • Origin: Tianjin China
DIN3352 Resilient Seated Gate Valve, DIN3202 F4, Flanged Ends, Non-Rising Stem, PN10/16.

1) Product information: The gate valves supplied are mainly used for adjusting water,
Steam, oil, gas, and natural gas in chemical industries
2) Standards: AWWA, DIN3352 F4/F5, BS5163, BS5150
3) Connection type: Flanged type, push-on type, mechanical joint type, plain ends
Type, PVC socket
4) Material:
A) Body: Ductile iron
B) Wedge: Ductile iron, core fully vulcanized with NBR or EPDM rubber
C) Wedge nut: Brass
D) Stem: Stainless steel, BS970 431S29 or DIN17440 X 20Cr13
E) Gasket: NBR
F) Bonnet: Ductile iron
G) O-ring: NBR
H) Washer: Carbon steel or stainless steel
5) Size: 50-600mm/2" - 24"
6) Pressure rate: PN10, PN16
7) Coating:
A) Fusion-bonded epoxy 200-250 microns inside and outside
B) Coating as per customers' requirement
 
NO. PART MATERIAL
1 Body Ductile Iron
2 Seat EPDM
3 Shaft Stainless steel 420
4 Disc Ductile Iron
5 Wedge Nut Brass
6 Bonnet Ductile Iron
7 O ring EPDM
8 Thrust ring Brass
9 sealing ring EPDM
10 socket head screw Carbon Steel
11 O ring EPDM
12 Hand wheel Ductile Iron
13 Stem Nut Brass


Rubber Encapsulated Wedge Gate Valve

 

Pure Metal Powder

Pure metal powder for thermal spray refers to a fine powder made from a single metal, such as aluminum, nickel, or titanium, that is used in thermal spray processes. Thermal spray is a coating technique where the metal powder is heated and propelled onto a substrate to create a protective or decorative coating. The pure metal powder is typically chosen based on the desired properties of the coating, such as corrosion resistance, wear resistance, or thermal conductivity. It is important to use pure metal powder to ensure the coating has the desired composition and performance characteristics.

Tungsten Powder,Plasma Spray Powder,Pure Tungsten Powder,Tungsten Metal Powder

Luoyang Golden Egret Geotools Co., Ltd , https://www.xtchvof.com