PP/PE Recycle Plastic Granulating Machine

• Model NO.: XDCM
• Screw: Double-Screw
• Electromagnetic Heater: Electromagnetic Heater
• Computerized: Computerized
• Certification: CE
• Screw & Barral Material: 38CrMoAl,Bimetallic,Nitrogen Treatment
• Material of Heater: Cast Aluminium,Cast Copper,Mica,Ceramic Heater
• Control System: PLC
• Motor: Siemens
• Heating Method: Electrical Heating,Electromagnetic Heating
• Trademark: Camel
• Specification: 4CBM
• HS Code: 84772010

• Raw Material: PE PP
• Inverter: Inverter
• Automation: Automatic
• Customized: Customized
• Condition: New
• Bearing Brand: SKF
• Warranty: 1year
• Electric Elements: Siemens or Schneider
• After-Sales Service: Engineers Available to Service Machinery Overseas
• Cutting Method: Die Face Cutting, Pulls Strap Cutting Method
• Transport Package: Standard Shipping Package
• Origin: Zhangjiagang, Jiangsu

Product Description of Waste PE Film Plastic Recycling Pelletizing Machine 
 
Plastic film granules machinery:
1.Raw material: plastic film
2.Final product: plastic granules
3.Hydraulic screen changer 
4.Special vacuum degassing system 
5.Output:100-800kg/h(according to customer requirements)
6.Cutting type of plastic film granules machinery : water ring or water cooling strand
 
Application raw materials:
PE, PP, BOPP, HDPE, LDPE, LLDPE, ABS, EPE, EPS, XPS, Stretch film, Non woven fabric, Woven bags, etc.
 
PE PP Plastic film pelletizing machine Introduction
This line is used to pe pp hdpe ldpe lldpe plastic film pelletizing machine.It is consist of Feeding conveyor belt,Metal detector,Cutter compactor force feeding,palstic extruder,Hydraulic screen exchanger and so on. Extruder barrel have two vacuum exhuast mouth which can fully remove the moisture and hence the final granule quality will be very perfect.The screw is made by 38CrMoAlA and nitriding treatment which can used for long lifetime.Motor speed adjusted by invertor.We use famous brand to manufacture it ,so we can guarantee it .we also can customzied it to you according to your requirement.
 


 Our Services of Waste PE Film Plastic Recycling Pelletizing Machine 
 
We will test machines in our factory before delivery. Customer check machines running in our factory, after customer is fully satisfied with the quality, then delivery, when machines arrive in customer's factory, we will send our engineer to test the machine in customer's factory
We supply machines technical support, material formulation; guarantee machines and spare parts supply


 FAQ of Waste PE Film Plastic Recycling Pelletizing Machine 
 
Q: Are you trading company or manufacturer ?
A: We are factory.
 
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 45-60 days if the goods are not in stock, it is according to what kind of machine you need
 
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
 
Q: What is your terms of payment ?
A: 30% T/T in advance ,70% balance before shipment or Negotiable 
If you have another question, please feel free to contact us as below

Sand Casting

Sand casting is used to produce a wide variety of metal components with complex geometries. These parts can vary greatly in size and weight, ranging from a couple ounces to several tons. Some smaller sand cast parts include components as gears, pulleys, crankshafts, connecting rods, and propellers. Larger applications include housings for large equipment and heavy machine bases. Sand casting is also common in producing automobile components, such as engine blocks, engine manifolds, cylinder heads, and transmission cases.


Sand casting, the most widely used casting process, utilizes expendable sand molds to form complex metal parts that can be made of nearly any alloy. Because the sand mold must be destroyed in order to remove the part, called the casting, sand casting typically has a low production rate. The sand casting process involves the use of a furnace, metal, pattern, and sand mold. The metal is melted in the furnace and then ladled and poured into the cavity of the sand mold, which is formed by the pattern. The sand mold separates along a parting line and the solidified casting can be removed. The steps in this process are described in greater detail in the next section. In sand casting, the primary piece of equipment is the mold, which contains several components. The mold is divided into two halves - the cope (upper half) and the drag (bottom half), which meet along a parting line. Both mold halves are contained inside a box, called a flask, which itself is divided along this parting line. The mold cavity is formed by packing sand around the pattern in each half of the flask. The sand can be packed by hand, but machines that use pressure or impact ensure even packing of the sand and require far less time, thus increasing the production rate. After the sand has been packed and the pattern is removed, a cavity will remain that forms the external shape of the casting. Some internal surfaces of the casting may be formed by cores.


Sand casting is able to use of almost any alloy. An advantage of sand casting is the ability to cast materials with high melting temperatures, including steel, nickel, and titanium. The four most common materials that are used in sand casting are shown below, along with their melting temperatures

Materials Melting temperature
Aluminum alloys 1220 °F (660 °C)
Brass alloys 1980 °F (1082 °C)
Cast iron 1990-2300 °F (1088-1260 °C)
Cast steel 2500 °F (1371 °C)

The material cost for sand casting includes the cost of the metal, melting the metal, the mold sand, and the core sand. The cost of the metal is determined by the weight of the part, calculated from part volume and material density, as well the unit price of the material. The melting cost will also be greater for a larger part weight and is influenced by the material, as some materials are more costly to melt. However, the melting cost in typically insignificant compared to the metal cost. The amount of mold sand that is used, and hence the cost, is also proportional to the weight of the part. Lastly, the cost of the core sand is determined by the quantity and size of the cores used to cast the part.

Sand casting process advantages
Can produce very large parts
Can form complex shapes
Many material options
Low tooling and equipment cost
Scrap can be recycled
Short lead time possible

Applications:
Construction Machine Parts,Scaffolding Parts,Engine blocks and manifolds, machine bases, gears, pulleys, agriculture parts,Marine Parts,medical parts,hardware, automobile parts,ect.

Sand Casting,Aluminum Sand Casting,Stainless Steel Sand Casting,Sand Precision Casting

Ningbo City Yinzhou Ruican Machinery Co.,Ltd , https://www.factoryforging.com