Pneumatic Floating Rubber Marine Boat Fenders for Ship Dock
1. General introduction
ISO17357:2014 Floating pneumatic rubber fender is an anti-clossion device for marine application in the world. It is made of synthetic-cord-reinforced rubber sheet with compressed air inside to enable it to float on the sea surface and work as a shock absorber when ship to ship transfer operation and ship to dock berthing and mooring operations.
Evergreen floating pneumatic rubber fenders fully company with all requirements on ISO17357:2002 Sstandard. Our products are certificated by CCS, DNV, GL, LR and BV.
 2.  Construction  features
The basic body construction of  Floating pneumatic rubber fender consists of outer rubber layers, synthetic-tire-cord layers and inner layers. Please take the picture for reference.
All of these layers are vulcanized together ,and then compress air  inside to enable the fender to float on the sea surface.Â
 3.  Specification and Performance
| DiameterxLength (mm) |
Initial internal pressure(kPa) | Energy(kj) | Reaction(kN) | Hull pressue(kPa) |
| 500x1000 | 50 | 6 | 64 | 132 |
| 600x1000 | 50 | 8 | 74 | 126 |
| 700x1500 | 50 | 17 | 137 | 135 |
| 1000x1500 | 50 | 32 | 182 | 122 |
| 1000x2000 | 50 | 45 | 257 | 132 |
| 1200x2000 | 50 | 63 | 297 | 126 |
| 1350x2500 | 50 | 102 | 427 | 130 |
| 1500x3000 | 50 | 153 | 579 | 132 |
| 1700x3000 | 50 | 191 | 639 | 128 |
| 2000x3500 | 50 | 308 | 875 | 128 |
| 2500x4000 | 50 | 663 | 1381 | 137 |
| 2500x5500 | 50 | 943 | 2019 | 148 |
| 3300x4500 | 50 | 1175 | 1884 | 130 |
| 3300x6500 | 50 | 1814 | 3015 | 146 |
| 4500x9000 | 50 | 4752 | 5747 | 146 |
Yokohama Pneumatic rubber fender are available from 500X1000mm to 3300X6500mm, including all the standard and no-standard specifications.
Details:
    
4.Pressure requirements of Yokohama type Pneumatic Rubber Fenders -
Evergreen-Maritime manufactures marine rubber fender with 50kPa (pneumatic 50) and 80kPa (pneumatic 80) initial pressure. The internal pressure, endurable pressure, safety-valve setting pressure and hydraulic test pressure are also in compliance with the requirements of ISO17357:2002.
Fenders of diameter 2500mm and larger equipped with safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally.Â
Â
 
 
Contact manufacturer directly for more details !
Marketing Manager:Â Â Â Â Aimee Sun
 Â
Tel: 0086 17663929266
EVA mat is a kind of foam mat for EVA sport mat, EVA Exercise Mat, and EVA training mat, made from Eco-friendly, high density, closed cell, non-smell and non-toxic EVA foam material.
The EVA mat is offered in either 60cm x 60cm size or 100cm x 100cm size. 60cm x 60cm size. With interlocking edges, the mats can be easy to connect together without any loose.
60cm x 60cm EVA mat is normally applied in room, or gym. It is easy to store, more popular for the personal exercise lovers to use at home. Also it can be a good protection for home flooring if you are intended to set up a heavy training equipment in your house.
100cm x 100cm EVA mat is also called Martial Arts Mat,
Taekwondo mat, Karate mat, Judo mat, Jiu Jitsu mat and Aikido mat, cause it is
normally applied in dojo for Taekwondo, Karate, Judo, Jiu Jitsu and Aikido training.
Also the mat is reversible with double colors, which forms a standard size
flooring for training.
Eva Mat,Eva Tatami Mat,Training Mat,Judo Mats,Interlocking Foam Tiles,Eva Foam Mat
Huizhou City Melors Plastic Products Co., Limited , https://www.foamexpert.net