Â
2, Heat insulation and Saving Energy
3, Corrosion Resistant
4, Lower Installation Costs
5, Higher Flow Capacity
6, Long Life
7, Recycled and Environment-friendly
electrical fusion PE pipe fittings for waterÂ
Product Description
PE pipe electrical fittings list
Â
| female lectrical  coupling | lectrical coupling | reduce lectrical coupling |  male lectrical  coupling |
| lectrical tee | lectrical reduce tee |  |  |
| 90 lectrical elbow | elbow lectrical  reduce | lectrical male elbow | lectrical female elbow |
| Â | Â | Â | Â |
factory overview
Product show
 RAW MATERIAL
PRODUCTION PROCESS
1.Measure and mark the depth or weld area of the pipe fitting (such as saddle pipe fitting) on the pipe with marker pen.
2.The oxide layer in the welding zone must be completely removed before welding.cleaning the pipe surface
3. The welding surfaces of pipes and fittings must be absolutely clean, dry and free from oil pollution.
4. Insert the welded end of the pipe into the limited shoulder or marking depth of the pipe fitting, and the pipe fitting must be installed together with the pipe without stress
5. Connect the welding machine plug to the pipe fitting jack, and accurately input the welding time and cooling time specified on the pipe fitting.Or scan the barcode directly to enter the welding parameters.
6, preparations were made, press the confirmation key, welding opportunity once again shows that welding parameter, completely confirmed, and then press start button to start the welding, the welding will automatically alarm prompt, after the end of the welding procedure.
CONTATCE US
EILEEN TENG
SHANDONG KANGYU PIPE INDUSTRIY CO.,LTD
JIAHZHAI INDURTARY PARK,LINYI CITY,SHANDONG PROVINCE ,CHINA
PHONE NO:0086 15168998025
Â
2, Heat insulation and Saving Energy
3, Corrosion Resistant
4, Lower Installation Costs
5, Higher Flow Capacity
6, Long Life
7, Recycled and Environment-friendly
electrical fusion PE pipe fittings for waterÂ
Product Description
PE pipe electrical fittings list
Â
| female lectrical  coupling | lectrical coupling | reduce lectrical coupling |  male lectrical  coupling |
| lectrical tee | lectrical reduce tee |  |  |
| 90 lectrical elbow | elbow lectrical  reduce | lectrical male elbow | lectrical female elbow |
| Â | Â | Â | Â |
factory overview
Product show
 RAW MATERIAL
PRODUCTION PROCESS
1.Measure and mark the depth or weld area of the pipe fitting (such as saddle pipe fitting) on the pipe with marker pen.
2.The oxide layer in the welding zone must be completely removed before welding.cleaning the pipe surface
3. The welding surfaces of pipes and fittings must be absolutely clean, dry and free from oil pollution.
4. Insert the welded end of the pipe into the limited shoulder or marking depth of the pipe fitting, and the pipe fitting must be installed together with the pipe without stress
5. Connect the welding machine plug to the pipe fitting jack, and accurately input the welding time and cooling time specified on the pipe fitting.Or scan the barcode directly to enter the welding parameters.
6, preparations were made, press the confirmation key, welding opportunity once again shows that welding parameter, completely confirmed, and then press start button to start the welding, the welding will automatically alarm prompt, after the end of the welding procedure.
CONTATCE US
EILEEN TENG
SHANDONG KANGYU PIPE INDUSTRIY CO.,LTD
JIAHZHAI INDURTARY PARK,LINYI CITY,SHANDONG PROVINCE ,CHINA
PHONE NO:0086 15168998025
-Shangair patent cylindrical direct-flow valve is used by our compressors. The valve is made from the stainless steel belt imported from Sweden and it is free from fracture during the working life.
-The piston of our air compressor applies the integral cast chromium plating ring, the working life is extended by 3 to 4 times.
-Shangair's unique compressor dynamic balancing technology. The vibration is only as a quarter of the world standard.
-The whole air compressor adopts rolling bearing without bearing shell
-To ensure safety and reliability of air compressor, redundancy design principle is adopted and multiple protection measures are taken: such as overload protection; overheat protection; phase-failure protection; low-voltage protection; drainage while stop running; startup under the condition pressure is zero.
-High reliability, long maintenance cycle, very low oil consumption (oil-saving), low energy (power saving), these dramatically reduce the general operating cost of our air compressors.
Mineral Bottle Making Machine,Compressor For Blow Machine,Air Compressor,Air Dryer
TAIZHOU WATON MACHINERY CO LTD , https://www.watonblowings.com