Structural Features The Lohr RPX6000 wheeled reconnaissance vehicle is a fully welded steel body. The crew compartment is in the front and the engine compartment is in the rear. The driver is located in the front of the car and has bulletproof glass windows with bezels on the front and on both sides. There are two doors on each side, with the upper fan opening backwards, the lower fan opening down to the top and the top having a hatch cover. Optional equipment is Euromissile's MILAN small turret; Euromissile's HOT small turret, with a 7.62mm machine gun; SAMM's BTM208 single turret, equipped with 12.7mm and Each one of the 7.62mm machine guns; Helio turret and other light turrets with a diameter of no more than 1.28m. It can also be equipped with three defenses, night vision and amphibious equipment. Lorry RPX6000 wheeled reconnaissance vehicles include variants such as command vehicles, personnel transport vehicles, radar vehicles, command/radio vehicles, and repair vehicles. [1]
Performance data model: RPX6000 Crew: 3 (or 2 to 4) people Drive form: 4×4 Car weight Empty: 5200kg Load: 6300kg Captain: 4.585m Car width: 2.164m Vehicle height (without arms): 1.650m The distance between the bottom and the ground is 0.400m Track: 1.828m Wheelbase: 2.700m Highway maximum speed: 110km/h Maximum travel: 600km (or 10h) Water depth: 0.95m Climbing degree: 60% Roll slope: 30% Climb vertical wall 0.4m high engine Production company: (Federal German) Bavaria Motors (BMW) Type: 6 cylinder gasoline engine Power: 132kW (180 hp) Transmission Type: Automatic Transmission Transfer case type: with differential lockout, manual, double speed Suspension type Front wheel: Lateral parallelogram with spiral spring, hydraulic damper and balance bar Rear Wheel: Back Bending Arm with Helical Spring, Hydraulic Damper and Balanced Armor Steering device type: hydraulic booster Tire specifications: 12.5×20×s runflat Brakes: Hydraulic drum brakes; acting on all wheels [1]
Cold drawn steel bar is produced by Hot Rolled Steel Bar or wire rod to get smooth surface, more precision size, higher mechanical properties, which improves machining characteristics. It can also get various sections and sizes. So cold drawn steel bar is a better choice for machining users.
For high carbon steel or alloy steel bars, to avoid the cracks in inner or surface, the bars are usually required to be annealed before cold drawing.
To get different mechanical properties or hardness depending on final usage, the cold drawn bars will also be heat treated such as annealed, normalized or quenched and tempered(Q&T).
For CNC machines usage, to get much more precision sizes or much more better surface roughness for chrome plating, the cold drawn steel bars can also be centerless ground or polished.
We have more advantages on producing cold drawn steel bars:
1) Big stocks of hot rolled round bars or wire rods as raw materials
2) Wide range of cold drawn steel bar sizes: from 10mm to 150mm
3) Different cold drawing medias powder or oil to get different surface
4) Straightening machines to get better straightness up to 0.5mm/m
5) Grinding and polishing machines to get better roughness upto 0.4um
6) Heat treating furnaces to adjust the mechanical properties
7) Full sets of testing equipment to test the sizes, mechanical properties and microstructure.
8) Multiple packages to avoid broken packages and anti-rusty
Cold Drawn Steel Bar,Cold Drawn Steel Rod,Cold Drawn Steel,Cold Drawn Steel Bar Manufacturers,Cold Drawn Steel Properties
SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.sdcolddrawnsteelbar.com