Japan's earthquake caused shortage of spare parts prices 5,000 yuan a week expensive

When Mr. Shen, who originally wanted to pick up the car market and sell car dealers for sale, bought a medium-high-grade car, he went to the 4S store yesterday to confess after asking for a price. “The salesman told me last week that he can still pay 3,000 yuan, but he can’t say it now. It's cheap because of Japan's supply of spare parts, the impact on manufacturers' production, and the reduction in new cars supplied to car dealers. What should I do? Will I buy it now or wait?"

In fact, more than Mr. Shen tangled, there are a lot of 4S shop manager in Hangzhou, “Now the factory has clearly told us that production cuts of 20% in April, the supply of our new car will also reduce by 23%. Our new car can be sold at most For two weeks, I'm afraid we will have to grab the car again."

The new car promised by the manufacturer did not give Buick several 4S shop owners in Hangzhou just happy for the good sales performance in March. A somewhat unexpected news has arrived because parts of the parts supplied by Japan are short-changing. Some of Buick’s models will be tight in April.

The same situation also appeared in Japanese brands such as 4S shop. Fu Shun, general manager of Hangzhou Shunxi Store, said that Guangqi Honda and Dongfeng Honda were both affected by the earthquake in Japan and reduced their production. Like Guangben, the new car available for the April manufacturers will also be between 30 and 40. However, there are only fifty or sixty vehicles. It is simply not enough to sell. Well, in the first quarter, they still have some stocks, but it is estimated that after half a month, the supply of some models will be tight. He said that this earthquake has damaged many parts production companies in Japan and has affected the global automotive industry.

Toyota Motors, which had the world’s highest number of sales last year, was also affected by new cars that were jointly produced in China. “Since late March, we have been delaying the arrival of several new cars in our stores. From April, the factory’s message Shows that will reduce production by 20%, to our new car will also be reduced by 20%." Jinfeng Toyota General Manager Ye Xiaomao said that most of the current car supply FAW Toyota is still normal, but like Reiz, Corolla and some other hot new car The color is no longer guaranteed.

However, the most entwined 4S shop bosses still, many of the original car manufacturers promised to suddenly lost the news midway. Mr. Wang is the head of a 4S shop at Dongfeng Honda. He said that a batch of mid-to-high-end vehicles requested last week have not arrived yet. In order to deal with possible shortages, he is prepared to prepare several well-sold cars for storage. Sell ​​slowly.

Hot car, the highest rise of 5,000 yuan "This earthquake in Japan has a great impact on the auto market, because many of the key electronic components of China's joint venture car prices are from Japan." Hangzhou car industry veteran, Zhang Jianye, general manager of Zhejiang Mikadi Research, he told reporters, at present, although the national production rate of car companies in China is very high, basically more than 80%. However, core components such as engines also need to be imported from Japan. Therefore, not only was the Japanese car affected by the quake, but Interconnect and Ford were no exceptions.

According to industry insiders, general 4S stores will prepare new car inventory for one to one and a half months, and from mid-March onwards, many manufacturers will begin to reduce the wholesale volume to dealers. If it is a good-selling car, it will certainly be in April. Supply is tight. It is understood that many 4S stores have quietly reduced the discount on new cars, and some even prices, and less two or three thousand dollars, more than 5,000 yuan.

Like Shanghai GM’s Buick Excelle and Hideo, one of the affected models was one of the affected models. In March, the Buick Excelle’s biggest discount in the Hangzhou market had reached 20,000 yuan, but this week’s maximum discount was only 15,000 yuan, which is equivalent to a return of 5,000 yuan. . As for the price increase of $2,000 to $3,000, there are already many. Some of the new cars like FAW Toyota have returned prices this week, up to 2,000 yuan. Ye Xiaomao said that in April, with the increasing shortage of new car supply, it is estimated that the price of the car will rise.

Global auto production has been reduced by 600,000 units. According to relevant reports, the survey data released by the US investigation company IHS indicates that as parts imported from Japan cannot be delivered on time, worldwide production of automobiles is expected to reduce production by 600,000 units by the end of March, if Japan Parts companies cannot resume production soon, and two months after the earthquake, worldwide production of cars may drop by as much as 30%.

Excavator cylinder oil seals

â‘ Hardness:

Due to the scientific synthesis of high-molecular polyurethane elastomer materials using iron rubber, the higher the hardness, the higher the modulus, the smaller the elongation, and the better the wear resistance and heat resistance. Well, in the range of minus 35 degrees Celsius to 100 degrees Celsius, and at a pressure of 60 to 70 MPa, the maximum sealing performance can be guaranteed.

Oil seal

â‘¡Pressure resistance:

The use of viscoelastic seals made of nitrile rubber is the most complete protection against damage caused by back pressure. In the range of minus 55 degrees Celsius to 100 degrees Celsius, and under a pressure of 21MPa, due to the rubber The seal is often in a compressed state, so the compression performance of the rubber seal must be considered. It not only achieves enhanced anti-climbing performance and low friction resistance, but also has good performance in dealing with special low-temperature oil, and can also be used in combination with Anti-wear Ring double-purpose retaining ring BRL type.


SPGW

â‘¢Prevention of oil leakage:

Sealing products made of polytetrafluoroethylene and nitrile rubber/PTFErubber; or seals made of nylon resin and nitrile rubber, which can be used in a wide range of applications with large pressure changes and fast sliding speeds According to the working condition, the input hydraulic pressure cutout is designed on the end face of the polytetrafluoroethylene ring to prevent penetration leakage. The maximum working temperature environment is minus 40 degrees Celsius to 160 degrees Celsius; the maximum working pressure is 50MPa.



SPGW piston seal

Material:PTFE+rubber elastomer+reinforced modified nylon
Temperature:Nitrile rubber -40~100℃
Speed:=1.0m/s
Pressure:≤50mpa



SPGW piston seal


SPGO piston seal

Material:PTFE+rubber elastomer
Temperature:Nitrile rubber -40~110℃
Speed:=1.0m/s
Pressure:≤35mpa



SPGO piston seal



SRUV piston rod seal

Material:NBR+thermoplastic polyurethane
Temperature: -35`90℃
Speed:=0.5m/s
Pressure:≤40mpa



SRUV piston rod seal



SRS piston rod seal

Material:PTFE+NBR
Temperature:-40~110℃
Speed:=1.0m/s
Pressure:≤40mpa



SRS piston rod seal



SRCB piston rod buffer seal

Material:Polyurethane+modified polyoxymethylene
Temperature: -35~110℃
Speed:=1.0m/s
Pressure:≤50mpa

SRCB piston rod buffer seal



SRU piston rod seal

Material:Polyurethane
Temperature:-35~100℃
Speed:=1.0m/s
Pressure:≤40mpa

SRU piston rod seal



SRD iron case dust prevention

Material:Polyurethane+metal skeleton material
Temperature:-40~110℃
Speed:=1.0m/s

SRD iron case dust prevention



SRDI soft dustproof

Material:polyurethane
Temperature:-40~110℃
Speed:=1.0m/

SRDI soft dustproof



SDS Dumbbell Seal

Material:polyurethane
Temperature: -35~110℃
Speed:=0.5m/s
Pressure:≤50mpa

SDS Dumbbell Seal


SPG piston combination seal

Temperature:

NBR+Polyurethane + Modified Polyoxymethylene

Temperature:-35`110℃

Speed:=0.3m/s

Pressure:≤70mpa

SPG piston combination seal02



SRNL piston rod seal

Material

NBR+Polyurethane + Modified Polyoxymethylene

Temperature:-35`110℃

Speed:=0.3m/s

Pressure:≤70mpa

SRNL piston rod seal02



SRDF Piston Rod Seal

Material

Polyester rubber

Temperature:-40`100℃

Speed:=1.0m/s

SRDF Piston Rod Seal02



SDY Y-seal

Material:Polyurethane

Temperature:-35~110℃

Speed:=0.5m/s

Pressure:≤70mpa

SDY Y-seal02











KZT anti fouling ring

KZT anti fouling ring



SDS Steffel

SDS Steffel




Piston main oil seal

Piston main oil seal








oil seals,hydraulic oil seal,track link oil seal,TCV oil seal,O-ring

Safe Seal Technology Co., Ltd. , https://www.jssafeseal.com