Â
Infrared Carbon and Sulfur Analyzer-Laboratory Instrument- Carbon and Sulfur Analyzer
General Introduction:
Application and Performance:
9920 Infrared Carbon & Sulfur Analyzer, being used coordinately with TT-L88 High-Frequency Induction Combustion Furnace, can determine the quality fraction of carbon and sulfur contained in steel, iron, alloy, non-ferrous metal, cement, ore, activator, glass, ceramic and other materials rapidly and accurately. This set of equipment is the high-tech product integrating optical, mechanical, electronic, computerization and analytical technologies. It characterizes itself in having wide range of measurement, precise and reliable results of analysis and the like advantages. Due to application of computerized technology, it has so far reached the advanced level domestically in respect to intellectualization of the instrument, the screen display of images and graphs, and collection and processing of data. It can be regarded as an ideal analyzer for various sectors to determine carbon and sulfur contents.
Component and Structure:
This instrument consists of infrared testing unit, high-frequency induction heating unit, computer, printer and electronic balance. See fig. (1) Â The following text will mainly describe the internal structure of high-frequency induction heating unit and infrared testing unit.
The high-frequency induction heating unit in frame structure has three layers. (Upper, middle and low layer) In the upper layer there are the high frequency inducting circuit, the over-current and over-time protection circuit and the electromagnetic valve control circuit; in the middle layer there are power source, the gas path breaking switch, the components for filtration and drying of the analytical gases; in the lower layer there are the HV transformer, the dust collector, and compress valve etc. From the front view, the left upper section includes plate current indication ammeter, grid current indication ammeter, supporting oxygen pressure gauge and adjusting knob, top oxygen flow regulator and analytical gas flow regulator. The lower part includes the furnace uplift & descent switch, over-current & over-time reset button, automatic cleaning button, power switch and the dryer. The right section is the combustion area for the furnace of which the upper part is mounted with the filtration and cleaning systems for the gases released after combustion while the lower part bearing the cylinder which is used for transmitting the testing sample into the combustion area during the sample analysis and taking the testing sample out of the combustion area at the end of combustion.
The infrared testing unit has two layers. In the upper layer there are modular power and Control PCB. In the lower layer, there is the gas analysis room, which consists of a carbon analysis tank, sulfur-analysis tank and current stabilizer.
Packing:
Company Information:
    As a diversified manufacturer of high-tech products, it was founded in 1999, and devoted to the products, sales and technical service for various industries and fields like Energy analysis instrument, Oil, coal, steel, and geology; medical analysis and application instruments, biochemistry analyzer, elisa reader, blood analyzer,and urine; as well as laboratory application instruments,autoclave/sterilizer,freeze dryer, incubator,drying oven,balance,ICP,DRS,HPLC,gas chromatography,and spectrophotometer,meanwhile,TRYTE Technologies integrated and purchased some companies of PCB board, highway instruments at home and abroad. Our company has become the "one stop" instrument procurement service provider worthy of the name.
    TRYTE technologies (TRYTE) mainly sell products by selling direct to customer, but also through distributors, resellers and manufacturer representatives, telephone sales and e-commerce sales, customers cover all over 80% of the world's countries and regions.TRYTE have solutions with rules adaptability according to the specific requirements of the design, from the instrument to some laboratories or departments.Whichever kind of solution you choose, you can fully trust it, because it is proved from 100, 00 successful results, leading development process, and decades of actual certification experience.
Why choose us?
1. We supply high quality products with reasonable price.
2. We are the professional manufacturer;
3. Advanced production machine;
4. Strict quality control system;
5. Ten people research&develop team;
6. We have professional sales team;
Â
Infrared Carbon and Sulfur Analyzer-Laboratory Instrument- Carbon and Sulfur Analyzer
General Introduction:
Application and Performance:
9920 Infrared Carbon & Sulfur Analyzer, being used coordinately with TT-L88 High-Frequency Induction Combustion Furnace, can determine the quality fraction of carbon and sulfur contained in steel, iron, alloy, non-ferrous metal, cement, ore, activator, glass, ceramic and other materials rapidly and accurately. This set of equipment is the high-tech product integrating optical, mechanical, electronic, computerization and analytical technologies. It characterizes itself in having wide range of measurement, precise and reliable results of analysis and the like advantages. Due to application of computerized technology, it has so far reached the advanced level domestically in respect to intellectualization of the instrument, the screen display of images and graphs, and collection and processing of data. It can be regarded as an ideal analyzer for various sectors to determine carbon and sulfur contents.
Component and Structure:
This instrument consists of infrared testing unit, high-frequency induction heating unit, computer, printer and electronic balance. See fig. (1) Â The following text will mainly describe the internal structure of high-frequency induction heating unit and infrared testing unit.
The high-frequency induction heating unit in frame structure has three layers. (Upper, middle and low layer) In the upper layer there are the high frequency inducting circuit, the over-current and over-time protection circuit and the electromagnetic valve control circuit; in the middle layer there are power source, the gas path breaking switch, the components for filtration and drying of the analytical gases; in the lower layer there are the HV transformer, the dust collector, and compress valve etc. From the front view, the left upper section includes plate current indication ammeter, grid current indication ammeter, supporting oxygen pressure gauge and adjusting knob, top oxygen flow regulator and analytical gas flow regulator. The lower part includes the furnace uplift & descent switch, over-current & over-time reset button, automatic cleaning button, power switch and the dryer. The right section is the combustion area for the furnace of which the upper part is mounted with the filtration and cleaning systems for the gases released after combustion while the lower part bearing the cylinder which is used for transmitting the testing sample into the combustion area during the sample analysis and taking the testing sample out of the combustion area at the end of combustion.
The infrared testing unit has two layers. In the upper layer there are modular power and Control PCB. In the lower layer, there is the gas analysis room, which consists of a carbon analysis tank, sulfur-analysis tank and current stabilizer.
Packing:
Company Information:
    As a diversified manufacturer of high-tech products, it was founded in 1999, and devoted to the products, sales and technical service for various industries and fields like Energy analysis instrument, Oil, coal, steel, and geology; medical analysis and application instruments, biochemistry analyzer, elisa reader, blood analyzer,and urine; as well as laboratory application instruments,autoclave/sterilizer,freeze dryer, incubator,drying oven,balance,ICP,DRS,HPLC,gas chromatography,and spectrophotometer,meanwhile,TRYTE Technologies integrated and purchased some companies of PCB board, highway instruments at home and abroad. Our company has become the "one stop" instrument procurement service provider worthy of the name.
    TRYTE technologies (TRYTE) mainly sell products by selling direct to customer, but also through distributors, resellers and manufacturer representatives, telephone sales and e-commerce sales, customers cover all over 80% of the world's countries and regions.TRYTE have solutions with rules adaptability according to the specific requirements of the design, from the instrument to some laboratories or departments.Whichever kind of solution you choose, you can fully trust it, because it is proved from 100, 00 successful results, leading development process, and decades of actual certification experience.
Why choose us?
1. We supply high quality products with reasonable price.
2. We are the professional manufacturer;
3. Advanced production machine;
4. Strict quality control system;
5. Ten people research&develop team;
6. We have professional sales team;
20 Inch Alloy Wheel is suitable for SUV PICKUP for Japan and Euro.USA.NORTH AMERICA.
We are the professional alloy wheel manufacturer since 2004, dedicated to low-pressure casting for 15 years. Our main market is to make exclusive mold and high-quality wheels for brands all over the world. Good reputation with 100% brand protection and high quality.
Special Service:
1. We provide timely per-sale and after-sale service: Before the sample/mass production order placed, all details will be checked and confirmed with customers; We can accept sample order for testing first. Also we have a free sample policy if you place an order to us
2. We provide LOGO customizing (Milled Letters and Word) on wheels;
3. Center caps and Carton LOGO customizing;
4. Wheel's finishing can be your requested.
5. We can do forged and Lower pressure
Packing:
Normally packing there are PE foam\ guard ring\cardboard\ non-woven cap\ plastic bag\ instruction book, total packaging with carton. Pallet packaging is also available
Delivery: full painted+ 25-30days, machined face +30-35days
How do you ensure wheel quality and solved quality problem after sales?
Every wheel is physically tested in compliance with JWL VIA or TUV standard; we have internal small label on the wheel rim and steel stamp for control the wheel's production, Our team ensures the production process at every stage and our QC will inspect each procedure as well. While wheels have quality problems, take photos or videos of the problems and our small label send to us. You can send back the problem goods or we will send our representative for inspection. When we confirm it's our problem, we will cut the same account or send the wheels in the next order.
20 Inch Alloy Wheel,Car Rims,Original Refit Alloy Wheel,Classic Cool Style Wheel Rim
China Wheel (Taishan) Co.,LTD , https://www.tcwwheels.com