Guangzhou Petrochemical's 1 million-ton/year catalytic reforming unit is Sinopec's “Ten Dragon†research project in 2008. It is the first domestic ultra-low pressure continuous reforming unit that was independently developed. The commissioning of this device broke the monopoly of foreign companies on continuous reorganization technology, making China the third country after the United States and France to have a complete set of continuous reforming technology.
As this device is the first device in China to use domestically produced continuous reforming technology, there is no ready-made experience in operation and operation. Guangzhou Petrochemical strengthens training, improves the skill level of employees, and continuously accumulates technical experience. In response to the problems exposed in the early stages of the operation of the new plant, Guangzhou Petrochemical will deploy the elite troops to conduct technical research, solve the problems that plagued the production of the equipment, and improve the equipment operation level.
At present, the equipment load has stabilized at 100% or more, up to 110%, reformed gasoline yield has increased to about 87%, pure hydrogen yield is 4%, comprehensive energy consumption is much lower than the design value, and the operating effect has been obtained by the headquarter experts. sure.
The efficient operation of the Guangzhou Petrochemical 1 million-ton/year catalytic reforming unit not only enhanced the production capacity of Guangzhou Petrochemical's high-grade gasoline, but also accumulated valuable experience for the promotion of domestic ultra-low pressure continuous reforming technology.
Spandex Warping Machine
Spandex warping machine also called spandex yarn warping machine; elastic yarn warping machine.
A-ZEN spandex warping machine AZE318 with vertical creel is driven by 5 sets high performance servo motors and adopted with advanced precisive laser to measure distance so that spandex warping is more stable, well equipped with and easier to operate. It is suitable for warping all kinds of spandex, especially for requirement of knitting high quality elastic textiles.
Technical Data:
Warp Line Speed: 100-600m/min;
Beam Size: Φ21"*21";
Warping ends: According to customers` demand;
Pre-drafting: 0-200%; Final Draft: 15-100%;
Brake time less than 0.6 s, the deviation of stop synchronization is less than 3%;
Creel Capacity: 616, 700, 728, 784, 792, 896, etc.
Servo Motor Power: Warper head power 13.2KW, Warper Head Tension Roller 2.9KW, Draft Roller 4.6KW, Creel: 2*6.9KW;
Main Motor: 10KW AC frequency conversion control;
Control Mode: Computerized real-time control, and user-friendly operation interface.
Spandex Warping Machine,Elastic,Beam Warping Machine, Yarn, Computerized Split Yarn Warping Machine
CHANGZHOU A-ZEN TEXTILE TECHNOLOGY CO.,LTD , https://www.tricotmachinery.com