-
Model NO.: pipe straightening
-
Usage: Wire, Pipe
-
Automatic Grade: Automatic
-
Warranty: 12 Months
-
Condition: New
-
Specification: 2300mm× 600mm× 1280mm
-
Type: Wire Straightening
-
Voltage: 220V
-
Principle: Large Deformation
-
Customized: Customized
-
Transport Package: Wooden
-
HS Code: 0701900000
Specifications
1. Model:2300mm*600mm*1280mm
2. Drilling crew plane height: About 850mm
3. Weight:500kg
4. Power Supply: Three-phase five-wire 380v bring zero line and ground wire
5. Power: 3kw
6. Air Pressure: 0.5-0.8mpa
7. rough shape cutting to adapt to the pipe:4-16 aluminium tube;4-16 copper pipe;4-16 band pipe
8. Feeding speed: 0-50M
9. cutting ways: Single - knife direct rotation without cuttings cutting. clipping time: 2-2.5S/time. Three meters per time about 6 seconds, An eight-hour day produces about 3,000 to 4,000 pieces.
10. Equipment use field: Automobile, air conditioning, refrigerator freezer, water dispenser, home appliance, etc.
11. control principle:PLC programmable logic controller,OP-320text operation,Synchronous belt feeding,servo motor drive,Japan omron rotary encoder counting,The pneumatic original adopts SNS.
12. This machine is aimed at the following (copper tube). The tube is straightened to the straightening mechanism of the main engine, and the servo motor drives the synchronous belt to drive the pipe to the cutting-free cutting machine.Finally, it is taken over by pneumatic aggregates, and the whole process is automatic and reliable. The machine break up and operate automatically, the mold change is simple, the operation is simple, the production efficiency is high.
13. Main structure and principle:Mechanical structure: it is composed of flat rack, straightening group, feeding tube section, cutting head section and feeding frame.
Gas path control: cylinder clamp, servo drive synchronous belt feeding tube, cylinder clamp, cutting tube, pull, cylinder connection.
Circuit control system: by PLC control servo motor forward tube, after the length of the encoder, after reaching the set length, the PLC control solenoid valve action, drive the cylinder to cut off the pipe.
Plate Heat Exchanger
Plate heat exchangers can be divided into categories according to their function or characteristics. The most common type is the Plate And Frame Heat Exchanger, which uses gaskets between its plates to create a hermetic seal between them. Another type is the Brazed Plate Heat Exchanger, which is a sealed unit where the plates are joined together by a brazing process. There are also welded plate heat exchangers, involving the use of welding, as well as semi-welded and fully-welded models. Pillow Plate Heat Exchanger consists of two thin metal plates with a herringbone structure on them, the plates are welded together to form a series of interconnected pillow chambers.
Plate heat exchangers are typically used for applications including heating, cooling, heat recovery and condensing, and are especially useful for industrial applications as they are compact. efficient, cost-effective, easy to use and require minima maintenance. Additionally, plate heat exchangers can be used totransfer fluids of different temperatures quickly and in a wide range of flow rates.
Plate heat exchangers are highly suitable for industrial and domestic applications such as air conditioning and refrigeration, radiators and condensers. Oil cooling, chemical processes, food and beverage processing.
Plate Heat Exchanger,Frame Heat Exchanger,Micro Plate Heat Exchangers,All Welded Plate Heat Exchanger
Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.jmheatexchanger.com
