Â
Â
Features:
1. Good dynamic weighing performance, and the accuracy will not be affected by shaking
2. With high anti-bump and anti-interface capability
3. High integrated electron and high stability performance
4. With memory-storage function of accumulating the total weight and total numbers
5. Adjust the division value according to the weighing objects
6. With high environmental suitability
7. Highlighted red or green LED, fit for the operation indoor or outdoor
8. Adopt stain gauge type load cell, with high precision and repeatability
9. Power on / off function of the remote control
Specifications:
| Stable time of reading | <10s |
| Viewing distance | 8-10m |
| Remote control distance | 8-10m |
| IP Grade | IP54 |
| Maximum safe overload | 150% F.S. |
| Ultimate overload | 300% F.S. |
| Operating temperature | -20°C~+50°C |
| Relative humidity | < 95% |
| Power supply of scale body | 6V4Ah lead-acid rechargeable battery |
| Power supply of remote control | 3VDC |
Â
The forced circulation pump does not rely on the centrifugal force of the impeller to the liquid, but uses the thrust of the rotating impeller blades to make the sent liquid flow along the direction of the pump axis. When the pump shaft is driven by the motor to rotate, because the blade has a certain helix angle with the axis of the pump shaft, a thrust (or lift) is generated on the liquid, and the liquid is pushed out and discharged along the discharge pipe. When the liquid is pushed out, a partial vacuum is formed at the original position, and the liquid outside will be sucked into the impeller along the inlet pipe under the action of atmospheric pressure. As long as the impeller keeps rotating, the pump can continuously suck in and discharge liquid. The forced circulation pump works by using the horizontal thrust along the direction of the pump axis generated by the rotation of the impeller, so it is also called a horizontal axial flow pump. Mainly used in the evaporation of diaphragm method caustic soda, phosphoric acid, vacuum salt production, lactic acid, calcium lactate, alumina, titanium dioxide, calcium chloride, ammonium chloride, sodium chlorate, sugar, molten salt, paper, waste water and other industries. Concentration and cooling, in order to improve the production capacity of the equipment, increase the heat transfer coefficient of the heat exchanger for forced circulation. Therefore, it can also be called an axial flow evaporative circulation pump.
Forced Circulation Pump,Circulation Pump,Recirculating Pump,Centrifugal Pumps
Jiangsu Qiantu Trading Co., Ltd. , https://www.jsqiantupump.com