Model NO.: PP150W-1X
Size: Large-Scale
Certification: CE, ISO9001: 2000
Condition: New
Operating Weight: 15000kg
Standard Bucket Capacity: 0.75m3
Engine Model: Cummins 4btaa3.9-C215
Overall Dimensions: 7700 X2700X3030 mm
Rated Power/Speed: 125HP/2200r/Min
Crawer Width: 600mm
Max. Dumping Height: 9102mm
Max Digging Reach: 8310mm
Max. Digging Depth: 5023mm
Max Didding Force: 85kn
Trademark: powerplus
Transport Package: Nude
Specification: CE/ ROHS/SGS/GMP
Origin: Luoyang, China
HS Code: 84295212
1. Main Pump: Kawasaki2. Type: Variable displacment axial piston pumps
3. Max  Displacement (cm3/r) 59.5x2Â
4. Working Pressure: 31.5 mpa
5. Hydraulic Motor: Slew-Variable motor/ Travel- Variable displacment Axial Piston Motors
6. Original KAWASAKI electronic systemÂ
7. Cabin with A/C, ROPS/FOPSÂ
8. With break hammerÂ
PowerPlus hydraulic wheel excavator PP150W/180W/120W-1X  produced in China  with  engine isstrong and usually used in mine application.Â
It has operation weight of  12T/15T/18T. It has strong performance in building construction and can be used in mine with hydraulic hammer to break stones into small ones for further processing in crushing plant.Â
Japan KAWASAKI hydraulic system and electronic system has provided  Wheel  excavator with reliable and excellent performance.
Technical Parameters
Â
| Model | Unit | PP150W-1X | |
| Operating weight | kg | 15000 | |
| Standard bucket capacity | m³ | 0.75 | |
| Engine | Engine Model | / | Cummins 4BT |
| Direct injection | / | √ | |
| Four strokes | / | √ | |
| Water cooling | / | √ | |
| Turbo charged | / | √ | |
| Air to air intercooler | / | √ | |
| No. of cylinders | / | 6 | |
| Rated power/speed | HP/rpm | 125/1800 | |
| Max. torque/speed | N.m | 2102/1400 | |
| Displacement | L | 15 | |
| The main performance | Travel speed | km/h | 4.2/3.0 |
| Swing speed | r/min | 7 | |
| Max. gradeability | / | ≥30 | |
| Ground pressure | kPa | 99.1 | |
| Max.Bucket digging force | kN | 370 | |
| Max.arm crowd force | kN | 354 | |
| Max.traction force | kN | 450 | |
| Hydraulic system | Main pump | / | 2 Plunger pump |
| Rate flow of main pump | L/min | 2×450 | |
| Max pressure of prime relief valve | MPa | 31.4/34.3 | |
| Max pressure of travel system | MPa | 34.3 | |
| Max pressure of swing system | MPa | 25.5 | |
| Max pressure of pilot system | MPa | 3.9 | |
| Oil capacity | Fuel tank capacity | L | 980 |
| Hydraulic tank capacity | L | 455 | |
| Engine lubrication | L | 48 | |
| Overall dimensions | A Overall length | mm | 7700 |
| B Overall width | mm | 2700 | |
| C Overall height | mm | 3030 | |
| D Overall width of upperstructure | mm | 3260 | |
| E Track length | mm | 5955 | |
| F Overall width of undercarriage | mm | 4260 | |
| G Crawer width |  | 650 | |
| H Track length on ground | mm | 4680 | |
| I Crawer gauge | mm | 2800/3350 | |
| J Clearance under counter weight | mm | 1552 | |
| K Ground clearance | mm | 853 | |
| L Min.tail swing radius | mm | 3900 | |
| Working range | A Max. digging height | mm | 11350 |
| B Max. dumping height | mm | 7370 | |
| C Max. digging depth | mm | 6900 | |
| D 8inch horizonal digging depth | mm | 6750 | |
| E Max. vertical wall digging depth | mm | 5500 | |
| F Max. digging reach | mm | 11580 | |
| G Min. swing radius | mm | 4750 | |
| Angle of arm deflection | Degree |  | |
Steel Flat Cross Arm Braces
1.Cross arm is an important part of the tower, its role is to install insulators and fittings, to support the wire, grounding wire, and make it as required to maintain a safe distance.
2. The full set can be with bolt and nut,etc.
3. Technical requirements:
4. Auto-cutter & puncher
5. No crack and No zinc leakage.
6. The zinc coating average thickness is 86 micron, can be up to >100 micron, or as your requirement.
7. All types and specifications is available.
8. Accept custimized types and sizes.
Steel Flat Cross Arm Braces,Galvanized Flat Steel Cross Arm Brace,Galvanized Steel Cross Arm,Cross Arm V Braces
Hebei Fangyu Trade Co., Ltd. , https://www.fangyu-filtermedia.com