The Puping
Antimony Mine is a skarn strontium deposit that is replaced by a medium-temperature hydrothermal fluid. Since the bare surface ore, weathering deeper level, soft ores, and
metal sulfides skarn minerals are subject to different degrees of oxidation, bismuthinite oxidized bismuth foaming, while
limonite ore more visible. nth = "12" day = " 30" islunardate = "False" isrocdate = "False"> 6.3.9.1 nature of the ore: ore is a limonite, hematite, bubble bismuth, bismuthinite
nickel manganese cobalt-hydroxyphenyl Mineral,
lithium hard manganese ore, iron-containing garnet,
black tungsten ore, etc., multi-element analysis of ore is shown in Table 1, mineral composition is shown in Table 2.
Table 1 Multi-element analysis
| element | Bi | Co | Fe | Wo 3 | Sn | SiO 2 | Al 2 O 3 |
| content% | 0.69 | 0.064 | 37.29 | 0.11 | 0.11 | 16.37 | 11.38 |
Table 2 Mineral composition
| mineral | Bubble mine | Limonite | Hematite | magnetite | Manganese mineral | Water cobalt mine | Gangue stone |
| content% | 0.73 | 74.16 | 1.12 | 0.45 | 2.38 | 0.05 | 20.38 |
The inlaid particle size of the foamed ore is generally 0.2-0.5 mm. The foaming ore is closely associated with limonite,
quartz and manganese minerals. Cobalt is present in 45% of the hydrocobalt ore, and the rest is combined with manganese ore. Iron is mainly limonite, and pure mineral contains Fe 51.76%. Nth="12" day="30" islunardate="False" isrocdate="False">6.3.9.2
Beneficiation Process In 1988, we conducted a beneficiation test. The test results show that the use of heavy-floating process is not as good as the direct flotation process. Flotation water glass, sodium carbonate, sodium sulphide adjusting agent is, xanthate,
coal oil, # 2 oil as
collector and
frother, small closed bismuth concentrate to give 23.62%, Bi recovery if produced containing 56.72% Bi 4-5% coarse concentrate, the flotation recovery rate can reach 70%, the crude concentrate is chemically beneficiated by acid beneficiation method, and the immersion liquid is added to NaOH to neutralize the cerium salt. 3 The beneficiation index produced Bi 56-75% Bi, the recovery rate was 59.06%.
PCB Cutting Machine
This type of SF-706 machine have to keep PCB board,the circular blade is moving.It is suitable for Special height for ultra high component can be 70mm.
This type of SF-701machine through adjust the height of track manually and control At 0.01 mm to solve the problem of V-CUT depth. Accept made to order super high components on the PC board such as power supply.The highest for 400mm is also accepted to customize.
The type of SF-705 v notch PCBA Cutting Machine which is suitable for Thickness of the to-be-cut base plate: 0.5-2.0mm, max. length of 300mm PC plate. Then Processing V-PCD plate, aluminum plate and CUT plate, etc.The using way is Controlled by electric pedal or pneumatic pedal, hoe knife plate splitting is completed by the motion of air cylinder.
The type of SF-716 machine is used for visual PCB depanel.
Visual Platform Desktop Separator,V-cut PCB Cut Depaneling Machine,PCB V-cut Cutting Machine
SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.singsunautomatics.com